UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF
THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 25, 2010
Commission file number 1–6770
 
Logo
 
MUELLER INDUSTRIES, INC.
(Exact name of registrant as specified in its charter)

Delaware
25-0790410
(State or other jurisdiction
(I.R.S. Employer
of incorporation or organization)
Identification No.)


8285 Tournament Drive, Suite 150
 
Memphis, Tennessee
38125
(Address of principal executive offices)
(Zip Code)

Registrant’s telephone number, including area code: (901) 753-3200

Securities registered pursuant to Section 12(b) of the Act:

Title of each class
Name of each exchange on which registered
   
Common Stock, $0.01 Par Value
New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark whether the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.           Yes  S  No  £

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.           Yes  £  No  S

Indicate by a check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes  S  No  £
 
 

 
Indicate by check mark whether the Registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit and post such files).Yes  S   No  £

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (Section 229.405 of this chapter) is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. S

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
 
 
Large accelerated filer   S
Accelerated filer   £
Non-accelerated filer   £
Smaller reporting company   £

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act).
Yes  £  No  S

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the Registrant’s most recently completed second fiscal quarter was $908,404,764.

The number of shares of the Registrant’s common stock outstanding as of February 18, 2011 was 37,855,071 excluding 2,236,431 treasury shares.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the following document are incorporated by reference into this Report: Registrant’s Definitive Proxy Statement for the 2011 Annual Meeting of Stockholders, scheduled to be mailed on or about March 23, 2011 (Part III).
 
2

 
MUELLER INDUSTRIES, INC.

_____________________

As used in this report, the terms “Company,” “Mueller,” and “Registrant” mean Mueller Industries, Inc. and its consolidated subsidiaries taken as a whole, unless the context indicates otherwise.

____________________

TABLE OF CONTENTS

     
Page
Part I
   
 
Item 1.
4
 
Item 1A.
10
 
Item 1B.
13
 
Item 2.
14
 
Item 3.
16
       
Part II
   
 
Item 5.
20
 
Item 6.
22
 
Item 7.
23
 
Item 7A.
23
 
Item 8.
23
 
Item 9.
23
 
Item 9A.
23
 
Item 9B.
26
       
Part III
   
 
Item 10.
26
 
Item 11.
26
 
Item 12.
27
 
Item 13.
28
 
Item 14.
28
       
Part IV
   
 
Item 15.
28
       
 
31
       
F-1

 
3

 
Table of Contents
 
PART I

ITEM 1.                 BUSINESS

Introduction

The Company is a leading manufacturer of copper, brass, plastic, and aluminum products.  The range of these products is broad:  copper tube and fittings; brass and copper alloy rod, bar, and shapes; aluminum and brass forgings; aluminum and copper impact extrusions; plastic pipe, fittings and valves; refrigeration valves and fittings; fabricated tubular products; and steel nipples.  The Company also resells imported brass and plastic plumbing valves, malleable iron fittings, faucets and plumbing specialty products.  Mueller's operations are located throughout the United States and in Canada, Mexico, Great Britain, and China.

The Company's businesses are aggregated into two reportable segments: the Plumbing & Refrigeration segment and the Original Equipment Manufacturers (OEM) segment.  For disclosure purposes, as permitted under Accounting Standards Codification (ASC) 280, Segment Reporting, certain operating segments are aggregated into reportable segments.  The Plumbing & Refrigeration segment is composed of the Standard Products Division (SPD), European Operations, and Mexican Operations.  The OEM segment is composed of the Industrial Products Division (IPD), Engineered Products Division (EPD), and Jiangsu Mueller–Xingrong Copper Industries Limited (Mueller-Xingrong), the Company’s Chinese joint venture.  Certain administrative expenses and expenses related primarily to retiree benefits at inactive operations are combined into the Corporate and Eliminations classification.  These reportable segments are described in more detail below.

SPD manufactures and sells copper tube, copper and plastic fittings, plastic pipe, and valves in North America and sources products for import distribution in North America.  European Operations manufacture copper tube in Europe, which is sold in Europe and the Middle East; activities also include import distribution in the U.K. and Ireland.  Mexican Operations consist of pipe nipple manufacturing and import distribution businesses including product lines of malleable iron fittings and other plumbing specialties.  The Plumbing & Refrigeration segment sells products to wholesalers in the HVAC (heating, ventilation, and air-conditioning), plumbing, and refrigeration markets, to distributors to the manufactured housing and recreational vehicle industries, and to building material retailers.

The OEM segment manufactures and sells brass and copper alloy rod, bar, and shapes; aluminum and brass forgings; aluminum and copper impact extrusions; refrigeration valves and fittings; fabricated tubular products; and gas valves and assemblies.  Mueller-Xingrong manufactures engineered copper tube primarily for air-conditioning applications; these products are sold primarily to OEMs located in China.  The OEM segment sells its products primarily to original equipment manufacturers, many of which are in the HVAC, plumbing, and refrigeration markets.

Information concerning segments and geographic information appears under “Note 15 - Industry Segments” in the Notes to Consolidated Financial Statements for the year ended December 25, 2010 in Item 8 of this Report, which is incorporated herein by reference.

The majority of the Company’s manufacturing facilities operated at significantly below capacity during 2010 and 2009 due to the reduced demand for the Company’s products arising from the general economic conditions in the U.S. and foreign markets that the Company serves.  The U.S. housing and residential construction market has been adversely affected in the recent economic downturn.  Per the U.S. Census Bureau, new housing starts in the U.S. were 588 thousand in 2010, which was a six percent increase compared with 554 thousand in 2009 and much lower than the historical amounts of 906 thousand in 2008 and 1.4 million in 2007.  The December 2010 seasonally adjusted annual rate of new housing starts was 529 thousand, which is a decrease of eight percent compared with the December 2009 rate of 576 thousand.  Housing construction activity and new home sales slowed significantly following the expiration of homebuyer tax incentives in April 2010.  This is reflected in the year over year increase in housing starts and the year over year decrease in the December seasonally adjusted annual rates.  Mortgage rates have remained at low levels during 2010 and 2009, as the average 30-year fixed mortgage rate was 4.71 percent in December 2010 and 4.93 percent in December 2009.  Commercial construction has also declined significantly in the past two years.  According to the U.S. Census Bureau, the private nonresidential value of construction put in place was $265.9 billion in 2010, $346.7 billion in 2009, and $408.6 billion in 2008.  Business conditions in the U.S. automotive industry have also been exceptionally difficult in the economic downturn, which affected the demand for various products in the Company’s OEM segment; however, some improvements have recently occurred.  All of these conditions have significantly affected the demand for virtually all of the Company’s core products.

The Company is a Delaware corporation incorporated on October 3, 1990.
 
4
 
Table of Contents
 
Plumbing & Refrigeration Segment

Mueller’s Plumbing & Refrigeration segment includes SPD, which manufactures a broad line of copper tube, in sizes ranging from 1/8 inch to 8 inch diameter, which are sold in various straight lengths and coils.  Mueller is a market leader in the air-conditioning and refrigeration service tube markets.  Additionally, Mueller supplies a variety of water tube in straight lengths and coils used for plumbing applications in virtually every type of construction project.  SPD also manufactures copper and plastic fittings and related components for the plumbing and heating industry that are used in water distribution systems, heating systems, air-conditioning, and refrigeration applications, and drainage, waste, and vent systems.  A major portion of SPD’s products are ultimately used in the domestic residential and commercial construction markets.

The Plumbing & Refrigeration segment also fabricates steel pipe nipples and resells imported brass and plastic plumbing valves, malleable iron fittings, faucets, and plumbing specialty products to plumbing wholesalers, distributors to the manufactured housing and recreational vehicle industries and building materials retailers.

On August 6, 2010 the Company expanded its existing line sets business by purchasing certain assets from Linesets, Inc., a manufacturer of assembled line sets with operations in Phoenix, Arizona and Atlanta, Georgia.  Net sales for the acquired operations were approximately $9.2 million in 2009.

The Plumbing & Refrigeration segment markets primarily through its own sales and distribution organization, which maintains sales offices and distribution centers throughout the United States and in Canada, Mexico, and Europe.  Additionally, products are sold and marketed through a network of agents, which, when combined with the Company’s sales organization, provide the Company broad geographic market representation.

These businesses are highly competitive.  The principal methods of competition for Mueller’s products are customer service, availability, and price.  The total amount of order backlog for the Plumbing & Refrigeration segment as of December 25, 2010 was not significant.

The Company competes with various companies, depending on the product line.  In the U.S. copper tubing business, the domestic competition includes Cerro Flow Products, Inc., Cambridge-Lee Industries LLC (a subsidiary of Industrias Unidas S.A. de C.V.), Wolverine Tube, Inc., KobeWieland Copper Products LLC, and Howell Metal Company (a subsidiary of Commercial Metals Company), as well as many actual and potential foreign competitors.  In the European copper tubing business, Mueller competes with several European-based manufacturers of copper tubing as well as other foreign-based manufacturers.  In the copper fittings market, competitors include Elkhart Products Company (a subsidiary of Aalberts Industries N.V.) and NIBCO, Inc., as well as several foreign manufacturers.  Additionally, the Company’s copper tube and fittings businesses compete with a large number of manufacturers of substitute products made from other metals and plastic.  The plastic fittings competitors include NIBCO, Inc., Charlotte Pipe & Foundry, and other companies.  Management believes that no single competitor offers such a wide-ranging product line as Mueller and that this is a competitive advantage in some markets.
 
5

 
Table of Contents
 
OEM Segment

Mueller’s OEM segment includes IPD, which manufactures brass rod, nonferrous forgings, and impact extrusions that are sold primarily to OEMs in the plumbing, refrigeration, fluid power, and automotive industries, as well as to other manufacturers and distributors.  The Company extrudes brass, bronze, and copper alloy rod in sizes ranging from 3/8 inches to 4 inches in diameter.  These alloys are used in applications that require a high degree of machinability, wear and corrosion resistance, as well as electrical conductivity.  IPD also manufactures brass and aluminum forgings, which are used in a wide variety of products, including automotive components, brass fittings, industrial machinery, valve bodies, gear blanks, and computer hardware.  IPD also serves the automotive, military ordnance, aerospace, and general manufacturing industries with cold-formed aluminum and copper impact extrusions.  Typical applications for impacts are high strength ordnance, high-conductivity electrical components, builders’ hardware, hydraulic systems, automotive parts, and other uses where toughness must be combined with varying complexities of design and finish.  The OEM segment also includes EPD, which manufactures and fabricates valves and custom OEM products for refrigeration and air-conditioning, gas appliance, and barbecue grill applications.  Additionally EPD manufactures shaped and formed tube, produced to tight tolerances, for baseboard heating, appliances, and medical instruments.  The total amount of order backlog for the OEM segment as of December 25, 2010 was not significant.

On December 28, 2010, the Company purchased certain assets from Tube Forming, L.P. (TFI).  TFI has operations in Carrollton, Texas, and Guadalupe, Mexico, where it produces precision copper return bends and crossovers, and custom-made tube components and brazed assemblies, including manifolds and headers.  TFI's estimated net sales for 2010 were approximately $35 million.

On February 27, 2007, the Company acquired 100 percent of the outstanding stock of Extruded Metals, Inc. (Extruded).  Extruded, located in Belding, Michigan, manufactures brass rod products, and during 2006 had annual net sales of approximately $360 million.  The acquisition of Extruded complements the Company’s existing brass rod product line.

In December 2005, two subsidiaries of the Company received a business license from a Chinese industry and commerce authority, establishing a joint venture with Jiangsu Xingrong Hi-Tech Co., Ltd. and Jiangsu Baiyang Industries Ltd.  The joint venture, in which the Company holds a 50.5 percent interest, produces inner groove and smooth tube in level-wound coils, pancake coils, and straight lengths, primarily to serve the Chinese domestic OEM air-conditioning market as well as other copper products.  The joint venture, which is located in Jintan City, Jiangsu Province, China, is named Jiangsu Mueller-Xingrong Copper Industries Limited (Mueller–Xingrong).

IPD and EPD primarily sell directly to OEM customers.  Competitors, primarily in the brass rod market, include Chase Brass and Copper Company, a subsidiary of Global Brass and Copper, Inc., and others both domestic and foreign.  Outside of North America, IPD and EPD sell products through various channels.
 
6

 
Table of Contents
 
Labor Relations

At December 25, 2010, the Company employed approximately 3,600 employees, of which approximately 1,900 were represented by various unions.  Those union contracts will expire as follows:

Location
Expiration Date
Port Huron, Michigan (Local 218 I.A.M.)
May 1, 2013
Port Huron, Michigan (Local 44 U.A.W.)
July 20, 2013
Belding, Michigan
August 15, 2012
Wynne, Arkansas
June 28, 2015
Fulton, Mississippi
August 1, 2012
North Wales, Pennsylvania
August 3, 2012
Waynesboro, Tennessee
November 9, 2012

The union agreements at the Company's U.K. and Mexico operations are renewed annually.  The Company expects to renew the U.K. and Mexico contracts without material disruption of its operations.
 
Raw Material and Energy Availability

The major portion of Mueller’s base metal requirements (primarily copper) is normally obtained through short-term supply contracts with competitive pricing provisions (for cathode) and the open market (for scrap).  Other raw materials used in the production of brass, including brass scrap, zinc, tin, and lead, are obtained from zinc and lead producers, open-market dealers, and customers with brass process scrap.  Raw materials used in the fabrication of aluminum and plastic products are purchased in the open market from major producers.

Adequate supplies of raw material have historically been available to the Company from primary producers, metal brokers, and scrap dealers.  Sufficient energy in the form of natural gas, fuel oils, and electricity is available to operate the Company’s production facilities.  While temporary shortages of raw material and fuels may occur occasionally, to date they have not materially hampered the Company’s operations.

During recent years, an increasing demand for copper and copper alloy primarily from China had an effect on the global distribution of such commodities.  The increased demand for copper (cathode and scrap) and copper alloy products from the export market, from time-to-time may cause a tightening in the domestic raw materials market.  Mueller’s copper tube facilities can accommodate both refined copper and copper scrap as the primary feedstock.  The Company has commitments from refined copper producers for a portion of its metal requirements for 2011.  Adequate quantities of copper are currently available.  While the Company will continue to react to market developments, resulting pricing volatility or supply disruptions, if any, could nonetheless adversely affect the Company.
 
Environmental Proceedings

Compliance with environmental laws and regulations is a matter of high priority for the Company.  Mueller’s provision for environmental matters related to all properties was $5.4 million for 2010 and $1.1 million for 2009.  The reserve for environmental matters was $23.9 million at December 25, 2010 and $23.3 million at December 26, 2009.  Environmental costs related to non-operating properties are classified as a component of other (expense) income, net and costs related to operating properties are included in cost of goods sold.  The Company does not anticipate that it will need to make material expenditures for compliance activities related to existing environmental matters during the remainder of the 2011 fiscal year, or for the next two fiscal years.
 
7

 
Table of Contents
 
Non-operating Properties

Southeast Kansas Sites

By letter dated October 10, 2006, the Kansas Department of Health and Environment (KDHE) advised the Company that environmental contamination has been identified at a former smelter site in southeast Kansas.  KDHE asserts that the Company is a corporate successor to an entity that is alleged to have owned and operated the smelter from 1915 to 1918.  The Company has since been advised of a possible connection between that same entity and two other former smelter sites in Kansas.  KDHE has requested that the Company and other potentially responsible parties (PRPs) negotiate a consent order with KDHE to address contamination at these sites.  The Company has participated in preliminary discussions with KDHE and the other PRPs.  The Company believes it is not liable for the contamination but as an alternative to litigation, the Company has entered into settlement negotiations with one of the other PRPs.  The negotiations are ongoing.  In 2008, the Company established a reserve of $9.5 million for this matter.  Due to the ongoing nature of negotiations, the timing of potential payment has not yet been determined.  The Company has also agreed to share the costs of a preliminary site assessment at one of the former smelter sites with two other PRPs.
 
Eureka Mills Site

On December 2, 2010, the United States District Court for Utah entered a consent decree between the Company, the United States and the State of Utah.  The decree resolves the claims asserted by the U.S. and the State of Utah related to Eureka Mills Superfund Site located in Juab County, Utah.  The Company’s connection to the Eureka Mills Site is through land within the site that was owned by Sharon Steel Corporation (Sharon), its predecessor, and a 1979 transaction with UV Industries (UV) in which Sharon allegedly assumed certain of UV’s liabilities.  The Company has provided $2.5 million to settle its claims, of which $250 thousand was paid to the State of Utah in December 2010 and the remainder was paid to the U.S. in February 2011.

Shasta Area Mine Sites

Mining Remedial Recovery Company (MRRC), a wholly owned subsidiary, owns certain inactive mines in Shasta County, California.  MRRC has continued a program, begun in the late 1980’s, of sealing mine portals with concrete plugs in mine adits which were discharging water.  The sealing program has achieved significant reductions in the metal load in discharges from these adits; however, additional reductions are required pursuant to an order issued by the California Regional Water Quality Control Board (QCB).  In response to a 1996 Order issued by the QCB, MRRC completed a feasibility study in 1997 describing measures designed to mitigate the effects of acid rock drainage.  In December 1998, the QCB modified the 1996 order extending MRRC’s time to comply with water quality standards.  In September 2002, the QCB adopted a new order requiring MRRC to adopt Best Management Practices (BMP) to control discharges of acid mine drainage.  That order extended the time to comply with water quality standards until September 2007.  During that time, implementation of BMP further reduced impacts of acid rock drainage; however full compliance has not been achieved.  The QCB is presently renewing MRRC’s discharge permit and will concurrently issue a new order.  It is expected that the new permit will include an order requiring continued implementation of BMP through 2015 to address residual discharges of acid rock drainage.  At this site, MRRC spent approximately $0.7 million in 2010, $0.5 million in 2009, and $0.5 million in 2008, and estimates that it will spend between approximately $8.6 million and $11.3 million over the next 20 years.

Lead Refinery Site

U.S.S. Lead Refinery, Inc. (Lead Refinery), a non-operating wholly owned subsidiary of MRRC, has conducted corrective action and interim remedial activities and studies (collectively, Site Activities) at Lead Refinery’s East Chicago, Indiana site pursuant to the Resource Conservation and Recovery Act.  Site Activities, which began in December 1996, have been substantially concluded.  Lead Refinery is required to perform monitoring and maintenance activities with respect to Site Activities pursuant to a post-closure permit issued by the Indiana Department of Environmental Management (IDEM) effective as of January 22, 2008.  Lead Refinery spent approximately $0.1 million annually in 2010, 2009, and 2008 with respect to this site.  Approximate costs to comply with the post-closure permit, including associated general and administrative costs, are between $2.1 million and $3.2 million over the next 20 years.

On April 9, 2009, pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), the U.S. Environmental Protection Agency (EPA) added the Lead Refinery site to the National Priorities List (NPL).  The NPL is a list of priority sites where the EPA has determined that there has been a release or threatened release of contaminants that warrant investigation and, if appropriate, remedial action.  The NPL does not assign liability to any party, owner or operator or to the owner of a property placed on the NPL.  The placement of a site on the NPL does not necessarily mean that remedial action must be taken.  On July 17, 2009, Lead Refinery received a written notice from the EPA that the agency is of the view that Lead Refinery may be a PRP under CERCLA in connection with the release or threat of release of hazardous substances including lead into a residential area adjacent to the site.  PRPs under CERCLA include current and former owners and operators of a site, persons who arranged for disposal or treatment of hazardous substances at a site, or persons who accepted hazardous substances for transport to a site.  The Company is unable to determine the likelihood of a material adverse outcome or the amount or range of a potential loss with respect to placement of this site on the NPL or in connection with the notice of potential liability concerning the residential area.  Lead Refinery lacks the financial resources needed to undertake any investigations or remedial action that may be required by the EPA pursuant to CERCLA.
 
8

 
Table of Contents
 
Operating Properties

Mueller Copper Tube Products, Inc.

In 1999, Mueller Copper Tube Products, Inc. (MCTP), a wholly owned subsidiary, commenced a cleanup and remediation of soil and groundwater at its Wynne, Arkansas plant.  MCTP is currently removing trichloroethylene, a cleaning solvent formerly used by MCTP, from the soil and groundwater.  On August 30, 2000, MCTP received approval of its Final Comprehensive Investigation Report and Storm Water Drainage Investigation Report addressing the treatment of soils and groundwater from the Arkansas Department of Environmental Quality (ADEQ).  The Company established a reserve for this project in connection with the acquisition of MCTP in 1998.  Effective November 17, 2008, MCTP entered into a Settlement Agreement and Administrative Order by Consent to submit a Supplemental Investigation Work Plan (SIWP) and subsequent Final Remediation Work Plan for the site.  By letter dated January 20, 2010, ADEQ approved the SIWP as submitted, with changes acceptable to the Company.  Costs to implement the work plans, including associated general and administrative costs, are approximately $0.6 million over the next 10 years.

Belding, Michigan Lead Matters

In 2009 and 2010, in response to requests from the Michigan Department of Natural Resources and Environment (MDNRE), Extruded Metals, Inc. (Extruded), a wholly owned subsidiary, conducted stack emissions testing of the stationary sources at its Belding, Michigan facility (the Belding Facility).  The results of tests on the West Chip Dryer showed non-compliance with certain emission limitation in the facility’s air use permit for that process, including the limitation for lead.  Modifications were made to the emissions control equipment on the West Chip Dryer, and subsequent testing demonstrated all stationary sources at the Belding Facility to be in compliance with the requirements of their air use permits.

In December 2009 and August 2010, the MDNRE issued a notice of violation and an enforcement notice with respect to the prior permit violations with respect to the West Chip Dryer.  Extruded will be required to enter into an administrative consent order (ACO) with the MDNRE to resolve the allegations contained in the notices.  The MDNRE has advised that it intends to impose a civil fine as part of the resolution of those allegations.  The MDNRE has not advised Extruded as to the amount of the fine it intends to impose.

Beginning in January 2009, and in response to the EPA’s 2008 order of magnitude reduction of the national ambient air quality standard (NAAQS) for lead, the MDNRE began monitoring ambient air lead levels in areas of the State of Michigan where stationary sources of lead emissions were known to be present.  Ambient air monitoring downwind of the Belding Facility demonstrated periodic exceedances of the new NAAQS for lead.  The MDNRE requested that Extruded submit an application for a new air use permit for the Belding Facility that will ensure compliance with that new federal standard.  The application was submitted on January 21, 2011.  The application proposes raising the stack height on the facility’s two chip dryers.  It is unknown whether the MDNRE will approve the application and what the ultimate cost of complying with the new NAAQS may be.

In October 2010, the MDNRE conducted testing of lead levels in soils on properties upwind and downwind of the Belding Facility.  Results of that testing showed exceedances of the Michigan generic residential direct contact cleanup criteria for lead on a number of the downwind properties.  Extruded has agreed with the MDNRE to investigate the extent of this condition and to perform remediation to the extent required by environmental laws.  Extruded has solicited proposals from a number of environmental consulting firms to assist it in these efforts.  A firm has been selected, and with their assistance, a conceptual interim response plan was submitted to the MDNRE.  The Company is awaiting a response to this plan.  The Company established a reserve for $0.4 million in 2010 for this matter, and is pursuing potential remedies from the previous owner.

In November 2010, Extruded received a request for information under Section 114(a) of the Clean Air Act from the EPA.  The focus of the EPA’s information request was the Belding Facility’s compliance with the National Emissions Standards for Hazardous Air Pollutants for Secondary Nonferrous Metals Processing Area Sources, 40 C.F.R. § 63.114679 (Subpart TTTTTT).  Extruded responded to the information request and advised the EPA that it was not subject to regulation under Subpart TTTTTT.


Other

In connection with acquisitions, the Company established environmental reserves to fund the cost of remediation at sites currently or formerly owned by various acquired entities.  The Company, through its acquired subsidiaries, is engaged in ongoing remediation and site characterization studies.
 
9

 
Table of Contents
 
Health and Safety Matters

On January 25, 2010, the Company received Citations and a Notification of Penalties from the Occupational Safety and Health Administration (OSHA) proposing civil penalties totaling approximately $0.7 million for various health and safety violations following inspections in 2009 of certain plants operated by subsidiaries in Fulton, Mississippi.  The Company has executed a final agreement with OSHA and the penalties have been reduced to approximately $0.4 million.  The resolution of these matters did not have a material adverse effect on the Company’s financial condition, results of operations or cash flows.


Other Business Factors

The Registrant’s business is not materially dependent on patents, trademarks, licenses, franchises, or concessions held.  In addition, expenditures for company-sponsored research and development activities were not material during 2010, 2009, or 2008.  No material portion of the Registrant’s business involves governmental contracts.  Seasonality of the Company’s sales is not significant.


SEC Filings

We make available through our internet website our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission (SEC).  To retrieve any of this information, you may access our internet home page at www.muellerindustries.com, select Mueller Financials, and then select SEC Filings.

Reports filed with the SEC may also be viewed or obtained at the SEC Public Reference Room at 100 F Street, N.E., Washington, D.C. 20549.  Information on the operation of the SEC Public Reference Room may be obtained by calling the SEC at 1-800-SEC-0330.  The SEC maintains a website that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC; the website address is www.sec.gov.


ITEM 1A.                      RISK FACTORS

The Company is exposed to risk as it operates its businesses.  To provide a framework to understand the operating environment of the Company, we are providing a brief explanation of the more significant risks associated with our businesses.  Although we have tried to identify and discuss key risk factors, others could emerge in the future.  These risk factors should be considered carefully when evaluating the Company and its businesses.

Increases in costs and the availability of energy and raw materials used in our products could impact our cost of goods sold and our distribution expenses, which could have a material adverse impact on our operating margins.

Both the costs of raw materials used in our manufactured products (copper, brass, zinc, aluminum, and PVC and ABS resins) and energy costs (electricity, natural gas and fuel) have been volatile during the last several years, which has resulted in changes in production and distribution costs.  For example, recent and pending climate change regulation and initiatives on the state, regional, federal, and international levels that have focused on reducing greenhouse gas (GHG) emissions from the energy and utility sectors may affect energy availability and costs in the near future.  While we typically attempt to pass costs through to our customers or to modify or adapt our activities to mitigate the impact of increases, we may not be able to do so successfully.  Failure to fully pass increases to our customers or to modify or adapt our activities to mitigate the impact could have a material adverse impact on our operating margins.  Additionally, if we are for any reason unable to obtain raw materials or energy, our ability to manufacture our finished goods would be impacted which could have a material adverse impact on our operating margins.
 
10

 
Table of Contents
 
The unplanned departure of key personnel could disrupt our business.

We depend on the continued efforts of our senior management.  The unplanned loss of key personnel, or the inability to hire and retain qualified executives, could negatively impact our ability to manage our business.

Economic conditions in the housing and commercial construction industries as well as changes in interest rates could have a material adverse impact on our business, financial condition, and results of operations.

Our businesses are sensitive to changes in general economic conditions, including, in particular, conditions in the housing and commercial construction industries.  Prices for our products are affected by overall supply and demand in the market for our products and for our competitors’ products.  In particular, market prices of building products historically have been volatile and cyclical, and we may be unable to control the timing and amount of pricing changes for our products.  Prolonged periods of weak demand or excess supply in any of our businesses could negatively affect our revenues and margins and could result in a material adverse impact on our business, financial condition, and results of operations.

The markets that we serve, including, in particular, the housing and commercial construction industries, are significantly affected by movements in interest rates and the availability of credit.  Significantly higher interest rates could have a material adverse effect on our business, financial condition, and results of operations.  Our businesses are also affected by a variety of other factors beyond our control, including, but not limited to, employment levels, foreign currency exchange rates, unforeseen inflationary pressures, and consumer confidence.  Since we operate in a variety of geographic areas, our businesses are subject to the economic conditions in each such area.  General economic downturns or localized downturns in the regions where we have operations could have a material adverse effect on our business, financial condition, and results of operations.

The recent deterioration of the general economic environment, distress in the financial markets and general uncertainty about the economy is having a significant negative impact on businesses and consumers around the world.  The well-publicized downturn in the construction markets, both residential and commercial, including construction lending, may result in protracted decreased demand for our products.  In addition, the impact of the economy on the operations or liquidity of any party with which we conduct our business, including our suppliers and customers, may adversely impact our business.  We are unsure of the duration and severity of this economic crisis.  However, if the crisis persists or worsens and economic conditions remain weak over a long period, the likelihood of the crisis having a significant impact on our business increases.

Competitive conditions including the impact of imports and substitute products could have a material adverse effect on our margins and profitability.

The markets we serve are competitive across all product lines.  Some consolidation of customers has occurred and may continue, which could shift buying power to customers.  In some cases, customers have moved production to low-cost countries such as China, or sourced components from there, which has reduced demand in North America for some of the products we produce.  These conditions could have a material adverse impact on our ability to maintain margins and profitability.  The potential threat of imports and substitute products is based upon many factors including raw material prices, distribution costs, foreign exchange rates, and production costs.  The end use of alternative import and/or substitute products could have a material adverse effect on our business, financial condition, and results of operations.
 
11

 
Table of Contents
 
Our exposure to exchange rate fluctuations on cross border transactions and the translation of local currency results into U.S. dollars could have an adverse impact on our results of operations or financial position.

We conduct our business through subsidiaries in several different countries and export our products to many countries.  Fluctuations in currency exchange rates could have a significant impact on the competitiveness of our products as well as the reported results of our operations, which are presented in U.S. dollars.  A significant and growing portion of our products are manufactured in, or acquired from suppliers located in, lower cost regions.  Cross border transactions, both with external parties and intercompany relationships, result in increased exposure to foreign exchange fluctuations.  The strengthening of certain currencies such as the euro and U.S. dollar could expose our U.S. based businesses to competitive threats from lower cost producers in other countries such as China.  Lastly, our sales are translated into U.S. dollars for reporting purposes.  The strengthening of the U.S. dollar could result in unfavorable translation effects when the results of foreign operations are translated into U.S. dollars.  Accordingly, significant changes in exchange rates, particularly the U.K. pound sterling, Mexican peso, and the Chinese renminbi, could have an adverse impact on our results of operations or financial position.

We are subject to claims, litigation, and regulatory proceedings that could have a material adverse effect on us.

We are, from time–to-time, involved in various claims, litigation matters, and regulatory proceedings.  These matters may include, among other things, contract disputes, personal injury claims, environmental claims, OSHA inspections or proceedings, other tort claims, employment and tax matters and other litigation including class actions that arise in the ordinary course of our business.  Although we intend to defend these matters vigorously, we cannot predict with certainty the outcome or effect of any claim or other litigation matter, and there can be no assurance as to the ultimate outcome of any litigation or regulatory proceeding.  Litigation and regulatory proceedings may have a material adverse effect on us because of potential adverse outcomes, defense costs, the diversion of our management’s resources, availability of insurance coverage and other factors.

A strike, other work stoppage or business interruption, or our inability to renew collective bargaining agreements on favorable terms, could impact our cost structure and our ability to operate our facilities and produce our products, which could have an adverse effect on our results of operations.

As of December 25, 2010, approximately one-half of our 3,600 employees were covered by collective bargaining or similar agreements.  If we are unable to negotiate acceptable new agreements with the unions representing our employees upon expiration of existing contracts, we could experience strikes or other work stoppages.  Strikes or other work stoppages could cause a significant disruption of operations at our facilities, which could have an adverse impact on us.  New or renewal agreements with unions representing our employees could call for higher wages or benefits paid to union members, which would increase our operating costs and could adversely affect our profitability.  Higher costs and/or limitations on our ability to operate our facilities and produce our products resulting from increased labor costs, strikes or other work stoppages could have an adverse effect on our results of operations.

In addition, unexpected interruptions in our operations or those of our customers or suppliers due to such causes as weather-related events or acts of God, such as earthquakes, could have an adverse effect on our results of operations.  For example, the EPA has recently found that global climate change would be expected to increase the severity and possibly the frequency of severe weather patterns such as hurricanes.  Although the financial impact of such is not reasonably estimable at this time, should such occur, our operations in certain coastal and flood-prone areas or operations of our customers and suppliers could be adversely affected.
 
12

 
Table of Contents
 
We are subject to environmental and health and safety laws and regulations and future compliance may have a material adverse effect on our results of operations or financial position.

The nature of our operations exposes us to the risk of liabilities and claims with respect to environmental matters and health and safety matters.  While we have established accruals intended to cover the cost of environmental remediation at contaminated sites, the actual cost is difficult to determine and may exceed our estimated reserves.  Further, changes to, or more rigorous enforcement or stringent interpretation of environmental or health and safety laws could require significant incremental costs to maintain compliance.  Recent and pending climate change regulation and initiatives on the state, regional, federal, and international levels may require certain of our facilities to reduce GHG emissions.  While not reasonably estimable at this time, this could require capital expenditures for environmental control facilities and/or the purchase of GHG emissions credits in the coming years.  In addition, with respect to environmental matters, future claims may be asserted against us for, among other things, past acts or omissions at locations operated by predecessor entities, or alleging damage or injury or seeking other relief in connection with environmental matters associated with our operations.  Future liabilities, claims and compliance costs may have a material adverse effect on us because of potential adverse outcomes, defense costs, the diversion of our management's resources, availability of insurance coverage and other factors.


ITEM 1B.                      UNRESOLVED STAFF COMMENTS

None.
 
13

 
Table of Contents
 
ITEM 2.                 PROPERTIES

Information pertaining to the Registrant’s major operating facilities is included below.  Except as noted, the Registrant owns all of its principal properties.  The Registrant’s plants are in satisfactory condition and are suitable for the purpose for which they were designed and are now being used.
             
Location
 
Approximate Property Size
   
Description
             
 Plumbing & Refrigeration Segment
       
         
 
Fulton, MS
 
418,000 sq. ft.
52.37 acres
   
Copper tube mill.  Facility includes casting, extruding, and finishing equipment to produce copper tubing, including tube feedstock for the Company’s copper fittings plants and Precision Tube factory.
             
 
Fulton, MS
 
103,000 sq. ft.
11.9 acres
   
Casting facility.  Facility includes casting equipment to produce copper billets used in the adjoining copper tube mill.
             
 
Wynne, AR
 
682,000 sq. ft.
39.2 acres
(1)
 
Copper tube mill and plastic fittings plant.  Facility includes casting, extruding, and finishing equipment to produce copper tubing and copper tube line sets, and produces DWV fittings using injection molding equipment.
             
 
Fulton, MS
 
58,500 sq. ft.
15.53 acres
   
Packaging and bar coding facility for retail channel sales.
             
 
Fulton, MS
 
70,000 sq. ft.
7.68 acres
(2)
 
Copper fittings plant.  High-volume facility that produces copper fittings using tube feedstock from the Company’s adjacent copper tube mill.
             
 
Covington, TN
 
159,500 sq. ft.
40.88 acres
   
Copper fittings plant.  Facility produces copper fittings using tube feedstock from the Company’s copper tube mills.
             
 
Ontario, CA
 
211,000 sq. ft.
10 acres
(3)
 
Distribution center and plastics manufacturing plant.  Produces DWV fittings using injection molding equipment and ABS plastic pipe using pipe extruders.
             
 
Fort Pierce, FL
 
69,875 sq. ft.
5.60 acres
   
Plastic fittings plant.  Produces pressure fittings using injection molding equipment.
             
 
Monterrey, Mexico
 
120,000 sq. ft.
3.4 acres
(3)
 
Pipe nipples plant.  Produces pipe nipples, cut pipe and merchant couplings.
             
 
Bilston, England, United Kingdom
 
402,500 sq. ft.
14.95 acres
   
Copper tube mill.  Facility includes casting, extruding, and finishing equipment to produce copper tubing.
             
 
Phoenix, AZ
 
26,000 sq. ft.
(3)
 
Line sets plant.  Produces standard and custom made line sets for HVAC markets.
             
 
Atlanta, GA
 
24,000 sq. ft.
(3)
 
Line sets plant.  Produces standard and custom made line sets for HVAC markets.
             
(continued)
 
14

 
Table of Contents
 
ITEM 2.                 PROPERTIES
(continued)
         
 
Location
 
Approximate Property Size
   
Description
             
OEM Segment
       
         
 
Port Huron, MI
 
322,500 sq. ft.
71.5 acres
   
Brass rod mill.  Facility includes casting, extruding, and finishing equipment to produce brass rods and bars, in various shapes and sizes.
             
 
Belding, MI
 
293,068 sq. ft.
17.64 acres
   
Brass rod mill.  Facility includes casting, extruding, and finishing equipment to produce brass rods and bars, in various shapes and sizes.
             
 
Port Huron, MI
 
127,500 sq. ft.
   
Forgings plant.  Produces brass and aluminum forgings.
             
 
Marysville, MI
 
81,500 sq. ft.
6.72 acres
   
Aluminum and copper impacts plant.  Produces made-to-order parts using cold impact processes.
             
 
Hartsville, TN
 
78,000 sq. ft.
4.51 acres
   
Refrigeration products plant.  Produces products used in refrigeration applications such as ball valves, line valves, and compressor valves.
             
 
Carthage, TN
 
67,520 sq. ft.
10.98 acres
   
Fabrication facility.  Produces precision tubular components and assemblies.
             
 
Waynesboro, TN
 
57,000 sq. ft.
5.0 acres
(4)
 
Gas valve plant.  Facility produces brass and aluminum valves and assemblies for the gas appliance industry.
             
 
North Wales, PA
 
174,000 sq. ft.
18.9 acres
   
Precision Tube factory.  Facility fabricates copper tubing, copper alloy tubing, aluminum tubing, and fabricated tubular products.
             
 
Brighton, MI
 
65,000  sq. ft.
(3)
 
Machining operation.  Facility machines component parts for supply to automotive industry.
             
 
Middletown, OH
 
55,000 sq. ft.
2.0 acres
   
Fabricating facility.  Produces burner systems and manifolds for the gas appliance industry.
             
 
Jintan City, Jiangsu Province, China
 
322,580  sq. ft
33.0 acres
(5)
 
Copper tube mill.  Facility includes casting, and finishing equipment to produce engineered copper tube primarily for OEMs.
             
 
Xinbei District, Changzhou, China
 
33,940 sq. ft
(3)
 
Refrigeration products plant.  Produces products used in refrigeration applications such as ball valves, line valves, and compressor valves.
             
 
Carrollton, TX
 
166,000 sq. ft.
(3)
 
Fabrication facility.  Produces tubular components, assemblies, and return bends for refrigeration and HVAC markets.
             

In addition, the Company owns and/or leases other properties used as distribution centers and corporate offices.
(1)  
Facility, or some portion thereof, is located on land leased from a local municipality, with an option to purchase at nominal cost.
(2)  
Facility is leased under a long-term lease agreement, with an option to purchase at nominal cost.
(3)  
Facility is leased under an operating lease.
(4)  
Facility is leased from a local municipality for a nominal amount.
(5)  
Facility is located on land that is under a long-term land use rights agreement.
 
 
15

 
Table of Contents
 
ITEM 3.                 LEGAL PROCEEDINGS

General

The Company is involved in certain litigation as a result of claims that arose in the ordinary course of business.  Additionally, the Company may realize the benefit of certain legal claims and litigation in the future; these gain contingencies are not recognized in the Consolidated Financial Statements.

Environmental Proceedings

Reference is made to “Environmental Matters” in Item 1 of this Report, which is incorporated herein by reference, for a description of environmental proceedings.

Carrier ACR Copper Tube Action

The Company has been named as a defendant in a pending litigation (the Carrier ACR Tube Action) brought by Carrier Corporation, Carrier S.A., and Carrier Italia S.p.A. (collectively, Carrier), direct purchasers of copper tube.  The Carrier ACR Tube Action was filed in March 2006 in the United States District Court for the Western District of Tennessee.  The Carrier ACR Tube Action alleges anticompetitive activities with respect to the sale of copper tubes used in, among other things, the manufacturing of air-conditioning and refrigeration units (ACR copper tubes).  The Company and Mueller Europe, Limited (Mueller Europe) are named in the Carrier ACR Tube Action.  The Carrier ACR Tube Action seeks monetary and other relief.

In July 2007, the Carrier ACR Tube Action was dismissed in its entirety for lack of subject matter jurisdiction as to all defendants.  In August 2007, plaintiffs filed with the United States Court of Appeals for the Sixth Circuit a notice of appeal from the judgment and order dismissing the complaint in the Carrier ACR Tube Action.  The Company and Mueller Europe filed notices of cross-appeal in August 2007.

In October 2007, Carrier filed with the United States Court of Appeals for the Sixth Circuit a motion to dismiss the cross-appeals, which the Court denied in December 2007.  All appeals in the Carrier ACR Tube Action remain pending.  Briefing on the appeals occurred in May 2009 and oral argument took place in October 2009.

Although the Company believes that the claims for relief in the Carrier ACR Tube Action are without merit, due to the procedural stage of the Carrier ACR Tube Action, the Company is unable to determine the likelihood of a material adverse outcome in the Carrier ACR Tube Action or the amount or range of a potential loss in the Carrier ACR Tube Action.

Canadian Dumping and Countervail Investigation

In June 2006, the Canada Border Services Agency (CBSA) initiated an investigation into the alleged dumping of certain copper pipe fittings from the United States and from South Korea, and the dumping and subsidizing of these same goods from China.  The Company and certain affiliated companies were identified by the CBSA as exporters and importers of these goods.

On January 18, 2007, the CBSA issued a final determination in its investigation.  The Company was found to have dumped subject goods during the CBSA’s investigation period.  On February 19, 2007, the Canadian International Trade Tribunal (CITT) concluded that the dumping of the subject goods from the United States had caused injury to the Canadian industry.

As a result of these findings, exports of subject goods to Canada by the Company made on or after October 20, 2006 have been subject to antidumping measures.  Under Canada’s system of prospective antidumping enforcement, the CBSA has issued normal values to the Company.  Antidumping duties will be imposed on the Company only to the extent that the Company’s future exports of copper pipe fittings are made at net export prices which are below these normal values.  If net export prices for subject goods exceed normal values, no antidumping duties will be payable.  These measures will remain in place for five years, at which time an expiry review will be conducted by Canadian authorities to determine whether these measures should be maintained for another five years or allowed to expire.
 
16

 
Table of Contents
 
On April 8, 2011, the CBSA will complete a review process pursuant to which revised normal values will be issued to exporters of subject goods, including the Company.  Depending on the level of the newly revised normal values relative to the normal values and selling prices of the Company's competitors in Canada, the Company's sales of subject goods in Canada may increase or decrease relative to prior levels.  In any event, given the small percentage of its products that are sold for export to Canada, the Company does not anticipate any material adverse effect on its financial condition, results of operations or cash flows as a result of the antidumping case in Canada.

The “sunset review” process, pursuant to which Canadian authorities will examine whether the dumping order should be revoked or maintained for another five years, will initiate in April 2011.

United States Department of Commerce Antidumping Review

On December 24, 2008, the United States Department of Commerce (DOC) initiated an antidumping administrative review of the antidumping duty order covering circular welded non-alloy steel pipe and tube from Mexico to determine the final antidumping duties owed on U.S. imports during the period November 1, 2007 through October 31, 2008 by certain subsidiaries of the Company.  On April 19, 2010, DOC published the final results of this review and assigned Mueller Comercial de Mexico, S. de R.L. de C.V. (Mueller Comercial) an antidumping duty rate of 48.33 percent.  The Company has appealed the final determination to the U.S. Court of International Trade.  The Company anticipates that certain of its subsidiaries will incur antidumping duties on subject imports made during the period of review and as such established a reserve of approximately $4.2 million for this matter.

On December 23, 2009, the DOC initiated an antidumping administrative review of the antidumping duty order covering circular welded non-alloy steel pipe and tube from Mexico for the November 1, 2008 through October 31, 2009 period of review.  The DOC selected Mueller Comercial as a respondent for this period of review.  On December 15, 2010, the DOC issued preliminary results and assigned a margin of dumping of 4.81 percent to Mueller Comercial.  Final results are expected no later than June 2011.  At this time, the Company is unable to estimate the impact, if any, that this matter will have on its financial position, results of operations, or cash flows.

On December 28, 2010, the DOC initiated an antidumping administrative review of the antidumping duty order covering circular welded non-alloy steel pipe and tube from Mexico for the November 1, 2009 through October 31, 2010 period of review.  The DOC has selected Mueller Comercial as a respondent for this period of review.  At this time, the Company is unable to estimate the impact, if any, that this matter will have on its financial position, results of operations, or cash flows.

United States Department of Commerce and United States International Trade Commission Antidumping Investigations

On September 30, 2009, two subsidiaries of Mueller Industries, Inc., along with Cerro Flow Products, Inc. and KobeWieland Copper Products LLC (collectively, Petitioners), jointly filed antidumping petitions with the U.S. Department of Commerce (DOC) and the U.S. International Trade Commission (ITC) alleging that imports of seamless refined copper pipe and tube from China and Mexico (subject imports) were being sold at less than fair value and were causing material injury (and threatening material injury) to the domestic industry.  On October 21, 2009, the DOC announced its decision to initiate antidumping investigations.  On November 13, 2009, the ITC announced its unanimous determination that there is a reasonable indication that the domestic industry is materially injured or threatened with material injury by reason of subject imports.  As a result of this preliminary determination, the DOC commenced antidumping investigations of Chinese and Mexican producers.

On May 12, 2010, the DOC published its preliminary affirmative determinations, finding antidumping rates from 29.52 percent to 30.90 percent for Mexico, and from 10.26 percent to 60.50 percent for China.  As a result, U.S. importers of subject imports were required to post bonds or cash deposits at these preliminary rates.  On October 1, 2010, the DOC published its final affirmative determinations, finding antidumping rates from 24.89 percent to 27.16 percent for Mexico (as amended), and from 11.25 percent to 60.85 percent for China.
 
17

 
Table of Contents
 
On November 22, 2010, the ITC issued its final affirmative determination that subject imports from China and Mexico threatened material injury to the domestic industry.  Also on November 22, 2010, the DOC published antidumping orders, with the effect that importers are required to post antidumping cash deposits at rates ranging from 24.89 percent to 27.16 percent (for subject imports from Mexico) and from 11.25 percent to 60.85 percent (for subject imports from China).

On December 22, 2010, certain Mexican parties requested panel reviews under the North American Free Trade Agreement (NAFTA) in order to appeal the ITC final determination.  At this time, the Company is unable to know the final disposition of that appeal.

Employment Litigation

On June 1, 2007, the Company filed a lawsuit in the Circuit Court of Dupage County, Illinois against Peter D. Berkman and Jeffrey A. Berkman, former executives of the Company and B&K Industries, Inc. (B&K), a wholly owned subsidiary of the Company, relating to their alleged breach of fiduciary duties and contractual obligations to the Company through, among other things, their involvement with a supplier of B&K during their employment with B&K.  The lawsuit alleged appropriation of corporate opportunities for personal benefit, failure to disclose competitive interests or other conflicts of interest, and unfair competition, as well as breach of employment agreements in connection with the foregoing.  The lawsuit sought compensatory and punitive damages, and other appropriate relief.  In August 2007, the defendants filed an answer to the complaint admitting Peter Berkman had not sought authorization to have an ownership interest in a supplier, and a counterclaim against the Company, B&K and certain of the Company’s officers and directors alleging defamation, tortious interference with prospective economic relations, and conspiracy, and seeking damages in unspecified amounts.  In September 2007, Homewerks Worldwide LLC, an entity formed by Peter Berkman, filed a complaint as an intervenor based on substantially the same allegations included in the Berkmans’ counterclaim.  In October 2007, the Company also filed a motion seeking to have the Berkmans’ counterclaim dismissed as a matter of law.  On January 3, 2008, the Court overruled that motion and the case proceeded to discovery of the relevant facts.

On September 5, 2008, Peter Berkman withdrew prior responses to discovery requests and asserted the Fifth Amendment privilege against self-incrimination as to all requests directed to him.  By that assertion, he took the position that his testimony about his actions would have the potential of exposing him to a criminal charge or criminal charges.  On October 24, 2008, the defendants filed a motion seeking leave to interpose an Amended Answer and Amended Counterclaims wherein Peter Berkman asserted the Fifth Amendment in response to the allegations in the complaint.  On December 19, 2008, the Company filed an answer to the Amended Counterclaims that included a new affirmative defense based on the assertion of the Fifth Amendment by Peter Berkman.

On October 3, 2008, in response to a motion to compel filed by the Company, the Court held, among other things, that Peter Berkman could not withhold documents on Fifth Amendment and attorney-client privilege grounds.  Peter Berkman moved for reconsideration of that order and his request was denied on November 19, 2008.  On December 10, 2008, Peter Berkman moved to file an interlocutory appeal regarding the Court’s ruling on the Company’s motion to compel.  On January 7, 2009, the motion for interlocutory appeal was granted and the Court found Peter Berkman in contempt for resisting discovery.  On February 6, 2009, Peter Berkman filed a notice of appeal with the Illinois Appellate Court, Second Judicial District.  All appellate briefs were submitted, oral argument took place on September 29, 2009, and a publicly available decision was rendered on March 23, 2010.  In that decision, the Illinois Appellate Court concluded that (i) Peter Berkman was not entitled to withhold documents on attorney-client privilege grounds that were created during the period that Katten Muchin Rosenman LLP represented both the Company and Peter Berkman, (ii) certain documents withheld on attorney-client privilege grounds needed to be submitted to the trial court for an in camera review to assess the applicability of the crime-fraud exception to the attorney-client privilege, and (iii) documents Peter Berkman withheld on Fifth Amendment grounds needed to be submitted to the trial court for an in camera review. Since obtaining this ruling, Peter Berkman unsuccessfully moved for a rehearing before the Illinois Appellate Court as to certain aspects of its decision and filed a petition for leave to appeal to the Illinois Supreme Court which was denied.
 
18

 
Table of Contents
 
On December 15, 2009, the parties exchanged reports prepared by their respective damages experts wherein the Company asserted a claim totaling $17.2 million, not including punitive damages, and defendants asserted a claim totaling $38.0 million.  The parties also exchanged rebuttal damages expert reports on March 5, 2010.  The Company believed the counterclaims were without merit and defendants were not entitled to the damages being sought.  Consequently, the Company intended to defend the counterclaims vigorously at trial, which was scheduled by the court to begin on January 31, 2011.

On December 10, 2010, during a pre-trial settlement conference before the court, the material terms of a settlement related to the Company’s lawsuit against Peter Berkman, Jeffrey Berkman, and Homewerks Worldwide LLC were agreed upon.  On that date, the court signed an order setting forth the material terms of the settlement, which required the payment of at least $10.5 million to the Company as follows (i) the payment of $7.5 million in cash by Peter and Jeffrey Berkman to the Company; (ii) execution and delivery by Peter and Jeffrey Berkman to the Company of a promissory note in the principal amount of $3 million,  secured by Peter Berkman's 70 percent interest in Homewerks Worldwide LLC; and (iii) additional future compensation.  The court order also required the exchange of mutual releases.  The court order did not provide for any payment by the Company, B&K, or any of their officers or directors with respect to the counterclaims.

Following the issuance of the December 10th court order, the Company further negotiated the terms of the settlement with the Berkmans and the parties agreed on the final terms of a settlement that requires the payment of $10.5 million in cash by Peter Berkman, Jeffrey Berkman, and Homewerks Worldwide LLC.  This all cash payment will be made to the Company instead of the payment of $7.5 million in cash along with a promissory note in the principal amount of $3 million.  Consistent with the terms of the December 10th court order, the final terms of the settlement agreement do not provide for any payment by the Company, B&K, or any of their officers or directors with respect to the counterclaims.  As a result, the Company does not anticipate any material adverse effect on its financial condition, results of operations or cash flows as a result of this employment litigation matter.  On February 7, 2011, the settlement agreement was executed by the parties and on February 10, 2011, the trial court dismissed with prejudice all claims and counterclaims asserted by the litigation.

 
19

 
Table of Contents
 
PART II

MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

As of February 21, 2011, the number of holders of record of Mueller’s common stock was approximately 1,150.  On February 18, 2011, the closing price for Mueller’s common stock on the New York Stock Exchange was $33.92.

Issuer Purchases of Equity Securities

The Company’s Board of Directors has extended, until October 2011, the authorization to repurchase up to ten million shares of the Company’s common stock through open market transactions or through privately negotiated transactions.  The Company has no obligation to purchase any shares and may cancel, suspend, or extend the time period for the purchase of shares at any time.  Any purchases will be funded primarily through existing cash and cash from operations.  The Company may hold any shares purchased in treasury or use a portion of the repurchased shares for its stock-based compensation plans, as well as for other corporate purposes.  From its initial authorization in 1999 through December 25, 2010, the Company had repurchased approximately 2.4 million shares under this authorization.  Below is a summary of the Company’s stock repurchases for the period ended December 25, 2010.

   
(a)
   
(b)
   
(c)
   
(d)
 
   
Total  Number of Shares Purchased
   
Average Price Paid per Share
   
Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs
   
Maximum Number of Shares That May Yet Be Purchased Under the Plans or Programs
 
                     
7,647,030
(1)
September 26 – October 23, 2010
   
-
   
$
-
                 
                                 
October 24 – November 20, 2010
   
10,906
 
(2)
 
30.53
                 
                                 
November 21 – December 25, 2010
   
-
     
-
                 
                                 
(1)
 
Shares available to be purchased under the Company's ten million share repurchase authorization until
October 2011. The extension of the authorization was announced on October 21, 2010.
(2)
 
Shares tendered to the Company by employee stock option holders in payment of purchase price and/or withholding taxes upon exercise.
                                 
     The Company’s Board of Directors declared a regular quarterly dividend of 10 cents per share on its common stock for each fiscal quarter of 2010 and 2009.  Payment of dividends in the future is dependent upon the Company’s financial condition, cash flows, capital requirements, earnings, and other factors.
 
     The high, low, and closing prices of Mueller's common stock on the New York Stock Exchange for each fiscal quarter of 2010 and 2009 were as follows:

   
High
   
Low
   
Close
 
2010
                 
                   
Fourth quarter
  $ 33.86     $ 25.23     $ 33.04  
Third quarter
    26.29       23.10       25.90  
Second quarter
    31.20       23.92       24.75  
First quarter
    26.62       21.88       25.96  
                         
2009
                       
                         
Fourth quarter
  $ 27.75     $ 22.55     $ 25.49  
Third quarter
    25.80       19.48       24.47  
Second quarter
    24.84       20.01       21.52  
First quarter
    26.26       16.01       22.11  
 
20

 
Table of Contents
 
PERFORMANCE GRAPH

The following table compares total stockholder return since December 31, 2005 to the Dow Jones U.S. Total Market Index (Total Market Index) and the Dow Jones U.S. Building Materials & Fixtures Index (Building Materials Index).  Total return values for the Total Market Index, the Building Materials Index and the Company were calculated based on cumulative total return values assuming reinvestment of dividends.  The common stock is traded on the New York Stock Exchange under the symbol MLI.

Stock Chart

 
2005
2006
2007
2008
2009
2010
Mueller Industries, Inc.
100
117
110
86
98
130
Dow Jones U.S. Total Market Index
100
116
123
74
100
116
Dow Jones U.S. Building Materials & Fixtures Index
100
115
111
73
87
100

 
21

 
Table of Contents
 
ITEM 6.                 SELECTED FINANCIAL DATA

(In thousands, except per share data)
 
2010
       
2009
       
2008
     
2007
   
2006
   
                                                 
For the fiscal year: (1)
                                         
                                                 
     
Net sales
 
$
2,059,797
       
$
1,547,225
       
$
2,558,448
     
$
2,697,845
   
$
2,510,912
   
                                                           
     
Operating income
   
136,147
 
(2)
 
   
32,220
 
(3)
 
   
126,096
 
(4)
 
 
191,621
(6)
 
 
218,885
 (7)
 
                           
  
                             
     
Net income attributable to Mueller Industries, Inc.
   
86,171
         
4,675
         
80,814
 
(5)
 
 
115,475
     
148,869
 (8)
 
                                                           
     
Diluted earnings per share
   
2.28
         
0.12
         
2.17
       
3.10
     
4.00
   
                                                           
     
Cash dividends per share
   
0.40
         
0.40
         
0.40
       
0.40
     
0.40
   
                                                           
At year-end:
                                                   
                                                           
     
Total assets
   
1,258,996
         
1,180,141
         
1,182,913
       
1,449,204
     
1,268,907
   
                                                           
     
Long-term debt
   
158,226
         
158,226
         
158,726
       
281,738
     
308,154
   
                                                           
                                                           
  (1)  
 
Includes activity of acquired businesses from the following purchase dates: Extruded, February 27, 2007, and Linesets, Inc., August 6, 2010.
 
           
  (2)  
 
Includes $22.7 million gain from settlement of insurance claims.
 
           
  (3)  
 
Includes impairment charges of $29.8 million, primarily related to goodwill.
 
           
 
(4)
 
 
 
Includes $14.9 million pre-tax gain from liquidation of LIFO layers less a pre-tax charge of $4.9 million to write down inventories to the lower-of-cost-or-market and a goodwill impairment charge of $18.0 million.
 
           
 
(5)
 
 
 
Includes the net-of-tax effect of all of the items described in (4) above, plus a provision of $15.4 million ($9.6 million after tax) related to environmental settlements and obligations and a gain of $21.6 million related to the early extinguishment of debt.
 
           
 
(6)
 
 
 
Includes $10.0 million pre-tax gain from liquidation of LIFO layers plus a gain from a copper litigation settlement of $8.9 million, less a goodwill impairment charge of $2.8 million.
 
           
  (7)  
 
In 2006, the Company recorded a pre-tax charge of $14.2 million to write down inventories to the lower-of-cost-or-market.
 
           
 
(8)
 
 
 
Includes the net-of-tax effect of the inventory write-down described in (7) above, plus a $7.7 million benefit for change in estimate regarding the future utilization of various tax incentives in 2006.
 
 
 
22

 
Table of Contents
 
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Management’s discussion and analysis of financial condition and results of operations is contained under the caption “Financial Review” submitted as a separate section of this Annual Report on Form 10-K commencing on page F-2.


ITEM 7A.       QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Quantitative and qualitative disclosures about market risk are contained under the caption “Financial Review” submitted as a separate section of this Annual Report on Form 10-K commencing on page F-2.


ITEM 8.          FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Financial Statements required by this item are contained in a separate section of this Annual Report on Form 10-K commencing on page F-1.


CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.


ITEM 9A.       CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

The Company maintains disclosure controls and procedures designed to ensure information required to be disclosed in Company reports filed under the Securities Exchange Act of 1934, as amended (the Exchange Act), is recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms.  Disclosure controls and procedures are designed to provide reasonable assurance that information required to be disclosed in Company reports filed under the Exchange Act is accumulated and communicated to management, including the Company’s Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure.

The Company's management, with the participation of the Company's Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of the Company's disclosure controls and procedures pursuant to Rule 13a-15(e) of the Exchange Act as of December 25, 2010.  Based on that evaluation, the Company's Chief Executive Officer and Chief Financial Officer have concluded that the Company's disclosure controls and procedures are effective as of December 25, 2010 to ensure that information required to be disclosed in Company reports filed under the Exchange Act is (i) recorded, processed, summarized and reported within the time periods specified in the SEC rules and forms and (ii) accumulated and communicated to management, including the Company's principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosure.
 
Management’s Report on Internal Control over Financial Reporting

The Company's management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) under the Securities Exchange Act of 1934.  Pursuant to the rules and regulations of the SEC, internal control over financial reporting is a process designed by, or under the supervision of, the Company’s principal executive and principal financial officers, and effected by the Company’s board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted in the United States and includes those policies and procedures that (i) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of the  Company’s assets; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the issuer are being made only in accordance with authorizations of the Company’s management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the financial statements.  Due to inherent limitations, internal control over financial reporting may not prevent or detect misstatements.  Further, because of changes in conditions, effectiveness of internal control over financial reporting may vary over time.
 
23

 
Table of Contents
 
The Company's management, with the participation of the Company's Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of the Company's internal control over financial reporting as of December 25, 2010 based on the control criteria established in a report entitled Internal Control—Integrated Framework, issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).  Based on such evaluation management has concluded that our internal control over financial reporting is effective as of December 25, 2010.

Ernst & Young LLP, the independent registered public accounting firm that audited the Company’s financial statements included in this Annual Report on Form 10-K, has issued an attestation report on the Company’s internal control over financial reporting, which is included herein.
 
Changes in Internal Control over Financial Reporting

There were no changes in the Company’s internal control over financial reporting during the Company’s fiscal quarter ended December 25, 2010, that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.
 
24

 
Table of Contents
 
Report of Independent Registered Public Accounting Firm
 
The Board of Directors and Stockholders of Mueller Industries, Inc.

We have audited Mueller Industries, Inc.’s internal control over financial reporting as of December 25, 2010, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Mueller Industries, Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements.  Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Mueller Industries, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 25, 2010, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Mueller Industries, Inc. as of December 25, 2010 and December 26, 2009, and the related consolidated statements of income, changes in equity and cash flows for each of the three years in the period ended December 25, 2010 and our report dated February 22, 2011 expressed an unqualified opinion thereon.
 

  /S/Ernst & Young LLP
   
Memphis, Tennessee
 
February 22, 2011
 

 
25

 
Table of Contents
 
ITEM 9B.                      OTHER INFORMATION

None.

PART III

ITEM 10.                      DIRECTORS, EXECUTIVE OFFICERS, AND CORPORATE GOVERNANCE

The information required by Item 10 is contained under the captions “Ownership of Common Stock by Directors and Executive Officers and Information about Director Nominees,” “Corporate Governance,” “Report of the Audit Committee of the Board of Directors,” and “Section 16(a) Beneficial Ownership Compliance Reporting” in the Company’s Proxy Statement for its 2011 Annual Meeting of Stockholders to be filed with the SEC on or about March 23, 2011, which is incorporated herein by reference.

The Company intends to disclose any amendments to its Code of Business Conduct and Ethics by posting such information to the Company’s website at www.muellerindustries.com.


ITEM 11.                      EXECUTIVE COMPENSATION

 
The information required by Item 11 is contained under the caption “Compensation Discussion and Analysis,” “Summary Compensation Table for 2010,” “2010 Grants of Plan Based Awards Table,” “Outstanding Equity Awards at Fiscal 2010 Year-End,” “2010 Option Exercises,” “Employment and Consulting Agreements,” “Potential Payments Under Employment and Consulting Agreements as of the End of 2010,” “2010 Director Compensation,” “Report of the Compensation Committee of the Board of Directors on Executive Compensation” and “Corporate Governance” in the Company’s Proxy Statement for its 2010 Annual Meeting of Stockholders to be filed with the SEC on or about March 23, 2011, which is incorporated herein by reference.
 
26

 
Table of Contents
 
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

Equity Compensation Plan Information

The following table discloses information regarding the securities to be issued and the securities remaining available for issuance under the Registrant’s stock-based incentive plans as of December 25, 2010 (shares in thousands):

   
(a)
 
(b)
 
(c)
 
Plan category
 
Number of securities to be issued upon exercise of outstanding options, warrants, and rights
 
 Weighted average exercise price of outstanding options, warrants, and rights
 
Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column (a))
 
               
Equity compensation plans approved by security holders
 
1,659
 
$27.87
 
732
(1)
               
Equity compensation plans not approved by security holders
 
 
 
 
               
Total
 
1,659
 
$27.87
 
732
 
               
(1) Of the 732 thousand securities remaining available for issuance under the equity compensation plans, 603 thousand are available under the Company’s 2009 Stock Incentive Plan for issuance of restricted stock, stock appreciation rights, or stock options.  The remaining securities are available for issuance of stock options only.

Other information required by Item 12 is contained under the captions “Principal Stockholders” and “Ownership of Common Stock by Directors and Executive Officers and Information about Director Nominees” in the Company’s Proxy Statement for its 2011 Annual Meeting of Stockholders to be filed with the SEC on or about March 23, 2011, which is incorporated herein by reference.
 
27

 
Table of Contents
 
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information required by Item 13 is contained under the caption “Corporate Governance” in the Company’s Proxy Statement for its 2011 Annual Meeting of Stockholders to be filed with the SEC on or about March 23, 2011, which is incorporated herein by reference.

ITEM 14.                PRINCIPAL ACCOUNTING FEES AND SERVICES

The information required by Item 14 is contained under the caption “Appointment of Independent Registered Public Accounting Firm” in the Company’s Proxy Statement for its 2011 Annual Meeting of Stockholders to be filed with the SEC on or about March 23, 2011, which is incorporated herein by reference.


PART IV

ITEM 15.                EXHIBITS, FINANCIAL STATEMENT SCHEDULES


(a)
The following documents are filed as part of this report:
   
1.
Financial Statements: the financial statements, notes, and report of independent registered public accounting firm described in Item 8 of this Annual Report on Form 10-K are contained in a separate section of this Annual Report on Form 10-K commencing on page F-1.
   
2.
Financial Statement Schedule: the financial statement schedule described in Item 8 of this report is contained in a separate section of this Annual Report on Form 10-K commencing on page F-1.
   
3.
Exhibits:
 
 
3.1
Restated Certificate of Incorporation of the Registrant dated February 8, 2007 (Incorporated herein by reference to Exhibit 3.1 of the Registrant’s Annual Report on Form 10-K, dated February 28, 2007, for the fiscal year ended December 30, 2006).
     
 
3.2
Amended and Restated By-laws of the Registrant, adopted and effective as of July 30, 2009 (Incorporated herein by reference to Exhibit 3.1 of the Registrant’s Current Report on Form 8 - K, dated July 30, 2009).
     
 
4.1
Indenture, dated as of October 26, 2004, by and between Mueller Industries, Inc, and SunTrust Bank, as trustee (Incorporated herein by reference to Exhibit 4.1 of the Registrant’s Current Report on Form 8-K, dated October 26, 2004).
     
 
4.2
Form of 6% Subordinated Debenture due 2014 (Incorporated herein by reference to Exhibit 4.2 of the Registrant’s Current Report on Form 8-K, dated October 26, 2004).
     
 
4.3
Certain instruments with respect to long-term debt of the Registrant have not been filed as Exhibits to this Report since the total amount of securities authorized under any such instruments does not exceed 10 percent of the total assets of the Registrant and its subsidiaries on a consolidated basis.  The Registrant agrees to furnish a copy of each such instrument upon request of the SEC.
     
 
10.1
Amended and Restated Employment Agreement, effective as of September 17, 1997, by and between the Registrant and Harvey L. Karp (Incorporated herein by reference to Exhibit 10.8 of the Registrant’s Annual Report on Form 10-K, dated March 24, 2003, for the fiscal year ended December 28, 2002).
 
 
28

Table of Contents
 
 
     
 
10.2
Amendment, dated June 21, 2004, to the Amended and Restated Employment Agreement dated as of September 17, 1997, by and between the Registrant and Harvey Karp (Incorporated herein by reference to Exhibit 10.3 of the Registrant’s Quarterly Report on Form 10-Q, dated July 16, 2004, for the quarter ended June 26, 2004).
     
 
10.3
Second Amendment, dated February 17, 2005, to the Amended and Restated Employment Agreement, dated as of September 17, 1997, between the Registrant and Harvey Karp (Incorporated herein by reference to Exhibit 10.2 of the Registrant’s Current Report on Form 8-K, dated May 5, 2005).
     
 
10.4
Third Amendment, dated October 25, 2007, to the Amended and Restated Employment Agreement, dated as of September 17, 1997, by and between the Registrant and Harvey Karp (Incorporated herein by reference to Exhibit 10.1 of the Registrant’s Current Report on Form 8-K, dated October 25, 2007).
     
 
10.5
Fourth Amendment, dated December 2, 2008, to the Amended and Restated Employment Agreement, dated as of September 17, 1997, by and between the Registrant and Harvey Karp (Incorporated herein by reference to Exhibit 10.5 of the Registrant’s Annual Report on Form 10-K, dated February 24, 2009, for the fiscal year ended December 27, 2008).
     
 
10.6
Amended and Restated Consulting Agreement, dated October 25, 2007, by and between the Registrant and Harvey Karp (Incorporated herein by reference to Exhibit 10.2 of the Registrant’s Current Report on Form 8-K, dated October 25, 2007).
     
 
10.7
Amendment No. 1, dated December 2, 2008, to the Amended and Restated Consulting Agreement, dated October 25, 2007, by and between the Registrant and Harvey Karp (Incorporated herein by reference to Exhibit 10.7 of the Registrant’s Annual Report on Form 10-K, dated February 24, 2009, for the fiscal year ended December 27, 2008).
     
 
10.8
Employment Agreement, effective October 17, 2002, by and between the Registrant and Kent A. McKee (Incorporated herein by reference to Exhibit 10.18 of the Registrant’s Annual Report on Form 10-K, dated March 24, 2003, for the fiscal year ended December 28, 2002).
     
 
10.9
Amendment No. 1, dated December 10, 2008, to the Employment Agreement, effective October 17, 2002, by and between the Registrant and Kent A. McKee (Incorporated herein by reference to Exhibit 10.16 of the Registrant’s Annual Report on Form 10-K, dated February 24, 2009, for the fiscal year ended December 27, 2008).
     
 
10.10
Amended and Restated Employment Agreement, effective October 30, 2008, by and between the Registrant and Gregory L. Christopher (Incorporated herein by reference to Exhibit 10.1 of the Registrant’s Current Report on Form 8-K, dated December 26, 2008).
     
 
10.11
Mueller Industries, Inc. 1991 Incentive Stock Option Plan, as amended (Incorporated herein by reference to Exhibit 10.6 of the Registrant’s Annual Report on Form 10-K, dated March 24, 2003, for the fiscal year ended December 28, 2002 and Exhibit 99.2 of the Registrant’s Current Report on Form 8-K, dated August 31, 2004).
     
 
10.12
Mueller Industries, Inc. 1994 Stock Option Plan, as amended (Incorporated herein by reference to Exhibit 10.11 of the Registrant’s Annual Report on Form 10-K, dated March 24, 2003, for the fiscal year ended December 28, 2002 and Exhibit 99.3 of the Registrant’s Current Report on Form 8-K, dated August 31, 2004).
     
 
 
29

 
Table of Contents
 
 
10.13
Mueller Industries, Inc. 1994 Non-Employee Director Stock Option Plan, as amended (Incorporated herein by reference to Exhibit 10.12 of the Registrant’s Annual Report on Form 10-K, dated March 24, 2003, for the fiscal year ended December 28, 2002 and Exhibit 99.6 of the Registrant’s Current Report on Form 8-K, dated August 31, 2004).
     
 
10.14
Mueller Industries, Inc. 1998 Stock Option Plan, as amended (Incorporated herein by reference to Exhibit 10.14 of the Registrant’s Annual Report on Form 10-K, dated March 24, 2003, for the fiscal year ended December 28, 2002 and Exhibit 99.4 of the Registrant’s Current Report on Form 8-K, dated August 31, 2004).

 
10.15
Mueller Industries, Inc. 2002 Stock Option Plan Amended and Restated as of February 16, 2006 (Incorporated herein by reference to Exhibit 10.20 of the Registrant’s Annual Report on Form 10-K, dated February 28, 2007, for the fiscal year ended December 30, 2006).
     
 
10.16
Mueller Industries, Inc. 2009 Stock Incentive Plan (Incorporated by reference from Appendix I to the Company’s 2009 Definitive Proxy Statement with respect to the Company’s 2009 Annual Meeting of Stockholders, as filed with the Securities and Exchange Commission on March 26, 2009).
     
 
10.17
Mueller Industries, Inc. Annual Bonus Plan (Incorporated herein by reference to Exhibit 10.1 of the Registrant’s Current Report on Form 8-K, dated May 5, 2005).
     
 
10.18
Summary description of the Registrant’s 2011 incentive plan for certain key employees.
     
 
10.19
Credit Agreement, dated as of December 1, 2006, among the Registrant (as Borrower) and Lasalle Bank Midwest National Association (as agent), and certain lenders named therein (Incorporated herein by reference to Exhibit 10.1 of the Registrant’s Current Report on Form 8-K, dated July 20, 2010).
     
 
21.0
Subsidiaries of the Registrant.
     
 
23.0
Consent of Independent Registered Public Accounting Firm.
     
 
31.1
Certification of Chief Executive Officer pursuant to Rule 13a-14(a) and Rule 15d-14(a) of the Securities Exchange Act of 1934, as amended.
     
 
31.2
Certification of Chief Financial Officer pursuant to Rule 13a-14(a) and Rule 15d-14(a) of the Securities Exchange Act of 1934, as amended.
     
 
32.1
Certification of Chief Executive Officer pursuant to 18 U.S.C. 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
     
 
32.2
Certification of Chief Financial Officer pursuant to 18 U.S.C. 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
     
  101.CAL XBRL Taxonomy Extension Calculation Linkbase
   
 
  101.DEF XBRL Taxonomy Extension Definition Linkbase 
   
 
  101.INS
XBRL Instance Document
   
 
 
101.LAB
XBRL Taxonomy Extension Label Linkbase 
 
 
 
  101.PRE XBRL Presentation Linkbase Document
     
  101.SCH XBRL Taxonomy Extension Schema 
   
 

 
30

 
Table of Contents
 
SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, on February 22, 2011.

MUELLER INDUSTRIES, INC.

 
/S/ Harvey L. Karp
 
 
Harvey L. Karp, Chairman of the Board
 

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the date indicated.

Signature
Title
Date
     
/S/ Harvey L Karp
Chairman of the Board, and Director
February 22, 2011
Harvey L. Karp
   
     
/S/Alexander P. Federbush
Vice Chairman of the Board, and Director
February 22, 2011
Alexander P. Federbush
   
     
/S/ Gregory L. Christopher
Chief Executive Officer
February 22, 2011
Gregory L. Christopher
(Principal Executive Officer), and Director
 
     
/S/ Paul J. Flaherty
Director
February 22, 2011
Paul J. Flaherty
   
     
/S/ Gennaro J. Fulvio
Director
February 22, 2011
Gennaro J. Fulvio
   
     
/S/ Gary S. Gladstein
Director
February 22, 2011
Gary S. Gladstein
   
     
/S/ Scott J. Goldman
Director
February 22, 2011
Scott J. Goldman
   
     
/S/ Terry Hermanson
Director
February 22, 2011
Terry Hermanson
   

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the date indicated.

 
Signature and Title
Date
     
 
/S/ Kent A. McKee
February 22, 2011
 
Kent A. McKee
 
 
Executive Vice President and Chief Financial Officer
 
 
(Principal Financial and Accounting Officer)
 
     
 
/S/ Richard W. Corman
February 22, 2011
 
Richard W. Corman
 
 
Vice President – Controller
 
 
 
31

 
Table of Contents
 
MUELLER INDUSTRIES, INC.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

   
F- 2
   
 
for the years ended December 25, 2010, December 26, 2009, and December 27, 2008
F- 12
   
 
as of December 25, 2010 and December 26, 2009
F- 13
   
 
for the years ended December 25, 2010, December 26, 2009, and December 27, 2008
F- 14
   
 
for the years ended December 25, 2010, December 26, 2009, and December 27, 2008
F- 15
   
F- 17
   
F- 46
   




FINANCIAL STATEMENT SCHEDULE

 
Schedule for the years ended December 25, 2010, December 26, 2009, and December 27, 2008
   
F- 47
   
 
 
F-1

 
Index
 
FINANCIAL REVIEW

Overview

The Company is a leading manufacturer of copper, brass, plastic, and aluminum products.  The range of these products is broad:  copper tube and fittings; brass and copper alloy rod, bar, and shapes; aluminum and brass forgings; aluminum and copper impact extrusions; plastic pipe, fittings and valves; refrigeration valves and fittings; fabricated tubular products; and steel nipples.  The Company also resells imported brass and plastic plumbing valves, malleable iron fittings, faucets and plumbing specialty products.  Mueller’s operations are located throughout the United States and in Canada, Mexico, Great Britain, and China.

The Company’s businesses are aggregated into two reportable segments: the Plumbing & Refrigeration segment and the Original Equipment Manufacturers (OEM) segment.  For disclosure purposes, as permitted under Accounting Standards Codification (ASC) 280, Segment Reporting, certain operating segments are aggregated into reportable segments.  The Plumbing & Refrigeration segment is composed of the Standard Products Division (SPD), European Operations, and Mexican Operations.  The OEM segment is composed of the Industrial Products Division (IPD), Engineered Products Division (EPD), and Jiangsu Mueller–Xingrong Copper Industries Limited (Mueller-Xingrong), the Company’s Chinese joint venture.  Certain administrative expenses and expenses related primarily to retiree benefits at inactive operations are combined into the Corporate and Eliminations classification.  These reportable segments are described in more detail below.

SPD manufactures and sells copper tube, copper and plastic fittings, plastic pipe, and valves in North America and sources products for import distribution in North America.  European Operations manufacture copper tube in Europe, which is sold in Europe and the Middle East; activities also include import distribution in the U.K. and Ireland.  Mexican Operations consist of pipe nipple manufacturing and import distribution businesses including product lines of malleable iron fittings and other plumbing specialties.  The Plumbing & Refrigeration segment sells products to wholesalers in the HVAC (heating, ventilation, and air-conditioning), plumbing, and refrigeration markets, to distributors to the manufactured housing and recreational vehicle industries, and to building material retailers.

The OEM segment manufactures and sells brass and copper alloy rod, bar, and shapes; aluminum and brass forgings; aluminum and copper impact extrusions; refrigeration valves and fittings; fabricated tubular products; and gas valves and assemblies.  Mueller–Xingrong manufactures engineered copper tube primarily for air-conditioning applications; these products are sold primarily to OEM’s located in China.  The OEM segment sells its products primarily to original equipment manufacturers, many of which are in the HVAC, plumbing, and refrigeration markets.

New housing starts and commercial construction are important determinants of the Company’s sales to the HVAC, refrigeration, and plumbing markets because the principal end use of a significant portion of the Company’s products is in the construction of single and multi-family housing and commercial buildings.  Repairs and remodeling projects are also important drivers of underlying demand for these products.

The majority of the Company’s manufacturing facilities operated at significantly below capacity during 2010 and 2009 due to the reduced demand for the Company’s products arising from the general economic conditions in the U.S. and foreign markets that the Company serves.  The U.S. housing and residential construction market has been adversely affected in the recent economic downturn.  Per the U.S. Census Bureau, new housing starts in the U.S. were 588 thousand in 2010, which was a six percent increase compared with 554 thousand in 2009 and much lower than the historical amounts of 906 thousand in 2008 and 1.4 million in 2007.  The December 2010 seasonally adjusted annual rate of new housing starts was 529 thousand which is a decrease of eight percent compared with the December 2009 rate of 576 thousand.  Housing construction activity and new home sales slowed significantly following the expiration of homebuyer tax incentives in April 2010.  This is reflected in the year-over-year increase in housing starts and the year-over-year decrease in the December seasonally adjusted annual rates.  Mortgage rates have remained at low levels during 2010 and 2009, as the average 30-year fixed mortgage rate was 4.71 percent in December 2010 and 4.93 percent in December 2009.  Commercial construction has also declined significantly in the past two years.  According to the U.S. Census Bureau, the private nonresidential value of construction put in place was $265.9 billion in 2010, $346.7 billion in 2009, and $408.6 billion in 2008.  Business conditions in the U.S. automotive industry have also been exceptionally difficult in the economic downturn, which affected the demand for various products in the Company’s OEM segment; however, some improvements have recently occurred.  All of these conditions have significantly affected the demand for virtually all of the Company’s core products.
 
F-2

 
Index
 
Residential construction activity is still at historical lows and recovery is expected to be modest due to continuing high rates of unemployment, the impact of mounting foreclosures, the tightening of lending terms and the phase-out of governmental stimulus spending programs.  The private non-residential construction sector, which includes offices, industrial and retail projects, declined by almost 25 percent in 2010 and 13 percent in 2009.  The Company expects that most of the conditions will gradually improve during 2011.  The increase in GDP of 2.9 percent in 2010 compared to a 2.6 percent decrease in 2009 is a sign that the U.S. economy is rebounding.

Profitability of certain of the Company’s product lines depends upon the “spreads” between the cost of raw material and the selling prices of its products.  The open market prices for copper cathode and scrap, for example, influence the selling price of copper tubing, a principal product manufactured by the Company.  The Company attempts to minimize the effects on profitability from fluctuations in material costs by passing through these costs to its customers.  The Company’s earnings and cash flow are dependent upon these spreads that fluctuate based upon market conditions.

Earnings and profitability are also impacted by unit volumes that are subject to market trends, such as substitute products and imports, and market share.  In core product lines, the Company intensively manages its pricing structure while attempting to maximize its profitability.  From time-to-time, this practice results in lost sales opportunities and lower volume.  Plastic plumbing systems are the primary substitute product; these products represent an increasing share of consumption.  U.S. consumption of copper tubing is still predominantly supplied by U.S. manufacturers, although imports from Mexico have been a significant factor.  In recent years, brass rod consumption in the U.S. has declined due to the outsourcing of many manufactured products from offshore regions.


Results of Operations

2010 Performance Compared with 2009

Consolidated net sales in 2010 were $2.06 billion, a 33 percent increase compared with net sales of $1.55 billion in 2009.  The increase was primarily attributable to higher unit sales volumes in most of the Company’s primary product lines and the increase in base metal prices, primarily copper.  Net selling prices generally fluctuate with changes in raw material costs.  Changes in raw material costs are generally passed through to customers by adjustments to selling prices.  The Comex average copper price in 2010 was approximately $3.43 per pound, or 46 percent higher than the 2009 average of $2.35 per pound.

Cost of goods sold was $1.77 billion in 2010 compared with $1.33 billion in 2009.  The year-over-year increase was due primarily to increased sales volume in core product lines and the increase in the price of copper, the Company’s principal raw material.

Depreciation and amortization remained relatively consistent.  Selling, general, and administrative expenses increased to $131.2 million in 2010; this $14.6 million increase was primarily due to increased employment costs, including incentive compensation of $9.2 million, increased foreign currency transaction losses of $2.0 million, and increased bad debt expense of $4.3 million.  These increases were partially offset by reduced professional fees of $2.9 million.

During 2010, the Company recognized insurance settlements of $22.7 million related to the reimbursement for losses claimed as a result of fires at the U.K. copper tube mill in November 2008, and the Fulton, Mississippi copper tube mill in July 2009, the results of which are not impacted by daily operations and are not expected to recur in future periods.

During 2009, the Company recognized impairment charges of $29.8 million primarily related to goodwill as a result of its annual assessment.  For this assessment, the projected operating results and cash flows for certain reporting units indicated that their fair market value was less than their net carrying value, including goodwill.
 
F-3

 
Index
 
Interest expense increased to $11.6 million in 2010 from $10.0 million in 2009.  This increase was due to increased borrowings by MuellerXingrong to fund operations.  Other (expense) income, net was $2.7 million expense in 2010 compared with income of $0.9 million for 2009.  This fluctuation was primarily due to an environmental provision of $2.5 million related to the Eureka Mills Site.

Income tax expense was $34.3 million, for an effective rate of 28 percent.  This rate was lower than what would be computed using the U.S. statutory federal rate primarily due to the release of a valuation allowance in a foreign jurisdiction of $5.5 million, the U.S. production activities deduction benefit of $3.0 million, the effect of foreign rates lower than the U.S. federal statutory rate and other foreign adjustments of $2.1 million, and reductions in tax contingencies of $1.5 million.  These decreases were partially offset by state tax expense, net of federal benefit, of $2.9 million.

The Company’s employment was approximately 3,600 at the end of 2010 compared with 3,300 at the end of 2009.

Plumbing & Refrigeration Segment

Net sales by the Plumbing & Refrigeration segment increased 25 percent to $1.1 billion in 2010 from $892.1 million in 2009.  The increase in net sales was due to higher unit sales volumes resulting from increased demand in the majority of the segment’s core product lines and from higher selling prices resulting from higher average prices of raw materials.  Of the $223.5 million increase in net sales, approximately $25.8 million was attributable to higher unit volume and approximately $197.7 million was due to higher net selling prices in the segment’s core product lines consisting primarily of copper tube, line sets, and fittings.  Cost of goods sold increased from $744.9 million in 2009 to $951.2 million in 2010 which was also due to higher sales volume and increasing raw material prices, primarily copper.  Depreciation and amortization decreased from $26.3 million in 2009 to $24.9 million in 2010 due to reduced depreciation expense resulting from certain assets becoming fully depreciated.  Selling, general, and administrative expenses increased from $74.4 million in 2009 to $78.6 million in 2010.  The increase is primarily due to increased sales and distribution expenses resulting from higher sales volume and increased employment costs, including incentive compensation of $1.6 million.  During 2009, the segment recorded non-cash impairment charges of $19.5 million primarily related to goodwill.  Operating income for the segment increased from $27.0 million to $83.7 million due to higher sales volume in the segment’s core product lines, increased spreads in core products especially in copper tube and fittings.

OEM Segment

The OEM segment’s net sales were $958.9 million in 2010 compared with $664.1 million in 2009.  The increase was due primarily to higher sales volume and higher net selling prices resulting from higher average costs of raw materials.  Of the $294.8 million increase in net sales, approximately $116.8 million was attributable to higher unit volume and approximately $178.0 million was due to higher net selling prices in the segment’s core product lines of brass rod, forgings, and commercial tube.  Cost of goods sold increased to $837.6 million in 2010 from $590.4 million in 2009, which was also due to the increase in sales volume and average costs of raw materials.  Depreciation and amortization remained relatively consistent.  Selling, general, and administrative expenses were $26.8 million in 2010 compared with $20.5 million in 2009.  The increase is due primarily to increased employment costs, including incentive compensation of $1.4 million, and increased bad debt expense of $3.9 million.  Operating income increased from $28.7 million in 2009 to $80.1 million in 2010, due primarily to higher sales volumes, improved unit spreads, and lower per unit conversion costs.  Impairment charges, primarily pertaining to goodwill were $10.3 million in 2009 compared with none in 2010.

2009 Performance Compared with 2008

Consolidated net sales in 2009 were $1.55 billion, a 40 percent decrease compared with net sales of $2.56 billion in 2008.  The decrease was primarily attributable to lower unit sales volumes in each of the Company’s primary product lines and the decline in base metal prices, primarily copper.  The Comex average copper price in 2009 was approximately $2.35 per pound, or approximately 25 percent lower than the 2008 average of $3.13 per pound.
 
F-4

 
Index
 
Cost of goods sold was $1.33 billion in 2009 compared with $2.23 billion in 2008.  The year-over-year decrease was due primarily to reduced sales volume in core product lines and the decline in the market value of copper, the Company’s principal raw material.  Additionally, cost of goods sold for 2008 included two non-cash items that were not present in 2009.  During the fourth quarter of 2008, the Company recognized a $14.9 million gain resulting from the liquidation of last-in, first-out (LIFO) inventory layers.  The LIFO gain was partially offset by the impact of certain inventories valued using the first-in, first-out (FIFO) method which were written down to the lower-of-cost-or-market, resulting in an increase to cost of goods sold of $4.9 million.

Depreciation and amortization expense was $41.6 million in 2009 compared with $44.3 million in 2008.  This decrease was primarily due to reduced depreciation expense resulting from assets written off following the fire in late 2008 at the Company’s European tube operations and the impact of lower average exchange rates of the British pound and the Mexico peso versus the U.S. dollar during 2009.  Selling, general, and administrative expenses decreased to $116.7 million in 2009; this $20.2 million decrease was due to reduced employment costs, including incentive compensation of $12.0 million, and lower sales and distribution expenses of $5.1 million associated with lower shipment volume.

During 2009, the Company incurred impairment charges of $29.8 million.  In the Plumbing and Refrigeration segment, the Company recognized goodwill impairment at Mueller Primaflow, the Company’s import distribution business located in the U.K.  In the OEM segment, the Company recognized goodwill impairment at the following reporting units: (i) Impacts & Micro Gauge, (ii) Gas Products, and (iii) Mueller-Xingrong.  The impairment charges resulted from diminished operating results and cash flows due to weak demand and economic conditions of the markets in which the business units participate.  During 2008, based upon its required annual assessment of goodwill, the Company recognized an estimated impairment charge of $18.0 million related to its Mexican Operations.

Interest expense decreased to $10.0 million in 2009 from $19.1 million in 2008.  The decrease was due primarily to reduced expense following the early extinguishment of $123.0 million of the Company’s 6% Subordinated Debentures in October 2008.  Other income, net decreased to $0.9 million in 2009 from $13.9 million in 2008 due to several factors.  First, interest income decreased by $6.2 million due to lower interest rates.  Additionally, the Company extinguished a significant portion of its 6% Subordinated Debentures in 2008 resulting in non-cash gains of $21.6 million, whereas in 2009 the Company only extinguished a small portion of the Subordinated Debentures resulting in a gain of $0.1 million.  Additionally, other income, net for 2008 included environmental expense of $15.4 million resulting from changes in estimates for future remediation costs in 2008 related to certain non-operating properties.

Income tax expense was $17.8 million, for an effective rate of 77 percent.  This rate was higher than what would be computed using the U.S. statutory federal rate primarily due to the impact of goodwill impairment charges related to nondeductible goodwill of $8.7 million and state tax expense, net of federal benefit, of $2.8 million.  These increases were partially offset by a reduction in tax contingencies of $1.0 million.

The Company’s employment was approximately 3,300 at the end of 2009 compared with 3,900 at the end of 2008.  The Company has reduced employment levels to adjust its workforce size to correspond with lower production levels as a result of reduced demand.

Plumbing & Refrigeration Segment

Net sales by the Plumbing & Refrigeration segment declined 36 percent to $892.1 million in 2009 from $1.40 billion in 2008.  The decrease in net sales was due to lower unit sales volumes resulting from weak demand in the majority of the segment’s core product lines and from lower selling prices resulting from lower average prices of raw materials.  Of the $508.6 million decrease in net sales, approximately $232.0 million was attributable to lower unit volume and approximately $218.0 million was due to lower net selling prices in the segment’s core product lines consisting primarily of copper tube, line sets, and fittings.  Cost of goods sold declined from $1.16 billion in 2008 to $744.9 million in 2009 also due to lower sales volume and declining raw material prices, primarily copper.  Included in cost of goods sold for the segment in 2008 was a gain resulting from the liquidation of LIFO inventory layers of $14.9 million and charges to write down certain inventories using the FIFO method to the lower-of-cost-or-market of $2.7 million. 
 
F-5

 
Index
 
Depreciation and amortization decreased from $28.8 million in 2008 to $26.3 million in 2009 due to reduced depreciation expense resulting from assets written off following the fire in late 2008 at the Company’s U.K. copper tube mill and the impact of lower average exchange rates of the British pound and the Mexico peso versus the U.S. dollar during 2009.  Selling, general, and administrative expenses decreased from $89.3 million in 2008 to $74.4 million in 2009.  The decrease is primarily due to decreased sales and distribution expenses of $4.7 million resulting from lower sales volume, and decreased employment costs, including incentive compensation of $7.4 million.  During 2009 and 2008, the segment recorded non-cash impairment charges of $19.5 million and $18.0 million, respectively, primarily related to goodwill.  Operating income for the segment declined from $106.8 million to $27.0 million due to lower sales volume in the segment’s core product lines, reduced spreads in core products especially in copper tube and fittings, and higher per-unit conversion costs associated with lower production volume.

OEM Segment

The OEM segment’s net sales were $664.1 million in 2009 compared with $1.18 billion in 2008.  The decrease was due primarily to lower sales volume and lower net selling prices resulting from lower average costs of raw materials.  Of the $512.8 million decrease in net sales, approximately $343.8 million was attributable to lower unit volume and approximately $134.5 million was due to lower net selling prices in the segment’s core product lines of brass rod, forgings, and commercial tube.  Cost of goods sold declined to $590.4 million in 2009 from $1.09 billion in 2008, which was also due to the decline in sales volume and average costs of raw material.  Depreciation and amortization remained relatively consistent.  Selling, general, and administrative expenses were $20.5 million in 2009 compared with $23.6 million in 2008.  The decrease is due primarily to reduced bad debt expense of $2.2 million and decreased employment costs of $1.7 million associated with headcount reductions.  Operating income decreased from $45.3 million in 2008 to $28.7 million in 2009, due primarily to lower sales volumes and increased impairment charges (primarily pertaining to goodwill) of $10.3 million, partially offset by improved unit spreads at the segment’s brass rod operations and reduced employment costs.

Liquidity and Capital Resources

Cash and cash equivalents increased to $394.1 million at December 25, 2010, from $346.0 million at December 26, 2009, for a net increase of $48.1 million.  Major components of the 2010 change included $56.4 million of cash provided by operating activities, $2.0 million of cash used in investing activities and $6.4 million of cash used in financing activities.

The primary components of cash provided by operating activities were consolidated net income of $87.5 million, insurance settlements of $22.7 million, changes in working capital, and non-cash adjustments primarily consisting of depreciation and amortization of $40.7 million.  Major changes in working capital included a $46.5 million increase in trade accounts receivable, $17.2 million increase in inventories and a $4.9 million increase in current liabilities.  Increases in the components of working capital, specifically accounts receivable and inventory, were primarily the result of rising raw material prices.

The Company spent approximately $1.9 million during 2010 for environmental matters.  As of December 25, 2010, the Company expects to spend $1.6 million in 2011, $1.0 million in 2012, $1.0 million in 2013, $1.0 million in 2014, $0.5 million in 2015, and $9.3 million thereafter for ongoing projects.  In addition, the Company has provided $2.5 million to settle its claims related to the Eureka Mills site, of which $250 thousand was paid in December 2010 and the remainder was paid in February 2011.  The timing of a potential payment for a $9.5 million settlement offer has not yet been determined.  

The major components of net cash used in investing activities during 2010 included $18.7 million used for capital expenditures and $2.0 million used for the acquisition of a business.  These uses were partially offset by $18.8 million of insurance proceeds.  Net cash used in financing activities totaled $6.4 million, which consists primarily of $15.1 million used for payment of regular quarterly dividends to stockholders of the Company and $0.7 million used for the payment of dividends to noncontrolling stockholders of Mueller-Xingrong.  These uses were partially offset by $2.8 million in proceeds from the exercise of incentive stock options and $6.9 million from net funding of the joint venture’s credit facility.
 
F-6

 
Index
 
The Company has a $200 million unsecured line-of-credit (Credit Facility) which expires in December 2011.  At year-end, the Company had no borrowings against the Credit Facility.  Approximately $8.8 million in letters of credit were backed by the Credit Facility at the end of 2010.  As of December 25, 2010, the Company’s total debt was $190.2 million or 18.9 percent of its total capitalization.  The Company expects to renew the Credit Facility during 2011.

Covenants contained in the Company’s financing obligations require, among other things, the maintenance of minimum levels of tangible net worth and the satisfaction of certain minimum financial ratios.  As of December 25, 2010, the Company was in compliance with all of its debt covenants.

Contractual cash obligations of the Company as of December 25, 2010 included the following:

         
Payments Due by Year
 
 (In millions)
 
Total
   
2011
   
2012-2013
   
2014-2015
   
Thereafter
 
                               
Debt
 
$
190.2
   
$
32.0
   
$
2.0
   
$
150.2
   
$
6.0
 
Interest on fixed rate debt
   
35.6
     
8.9
     
17.8
     
8.9
     
 
Consulting Agreement (1)
   
6.7
     
1.3
     
2.7
     
2.0
     
0.7
 
Operating leases
   
29.3
     
6.0
     
10.2
     
5.7
     
7.4
 
Purchase commitments (2)
   
203.5
     
203.5
     
     
     
 
                                         
Total contractual cash obligations
 
$
465.3
   
$
251.7
   
$
32.7
   
$
166.8
   
$
14.1
 
                                         
     
(1)
See Note 10 to Consolidated Financial Statements.  For the purposes of this disclosure, the Company assumed the Consulting Agreement is effective immediately.
 
     
(2)
The Company has contractual supply commitments for raw materials totaling $196.3 million at year end prices; these contracts contain variable pricing based on Comex and the London Metals Exchange (LME).  These commitments are for purchases of raw materials that are expected to be consumed in the ordinary course of business.
 
     

The above obligations will be satisfied with existing cash, the Credit Facility, and cash generated by operations.  Cash flows to fund pension and other postretirement benefit obligations were $4.1 million in 2010 and $4.4 million in 2009.  The Company has no off-balance sheet financing arrangements except for the operating leases identified above.

Fluctuations in the cost of copper and other raw materials affect the Company’s liquidity.  Changes in material costs directly impact components of working capital, primarily inventories and accounts receivable.  The price of copper has fluctuated significantly and averaged approximately $3.13 in 2008, $2.35 in 2009, and $3.43 in 2010.  During the fourth quarter of 2008, the price of copper declined significantly to $1.27 per pound by the end of 2008; however, the average price of copper increased each month during 2009 and was $3.27 per pound at the end of 2009.  During 2010, the price of copper steadily increased each month, with the exception of June, and was $4.25 per pound at the end of 2010.

The Company’s Board of Directors declared a regular quarterly dividend of 10 cents per share on its common stock during each quarter of 2010, 2009, and 2008.  Payment of dividends in the future is dependent upon the Company’s financial condition, cash flows, capital requirements, earnings, and other factors.

Management believes that cash provided by operations, the Credit Facility, and currently available cash of $394.1 million will be adequate to meet the Company’s normal future capital expenditure and operational needs.  The Company’s current ratio (current assets divided by current liabilities) was 4.7 to 1 as of December 25, 2010.
 
F-7

 
Index
 
The Company’s Board of Directors has extended, until October 2011, its authorization to repurchase up to ten million shares of the Company’s common stock through open market transactions or through privately negotiated transactions.  The Company has no obligation to repurchase any shares and may cancel, suspend, or extend the time period for the repurchase of shares at any time.  Any repurchases will be funded primarily through existing cash and cash from operations.  The Company may hold any shares repurchased in treasury or use a portion of the repurchased shares for employee benefit plans, as well as for other corporate purposes.  From its initial authorization in 1999 through December 25, 2010, the Company had repurchased approximately 2.4 million shares under this authorization.  In addition, the Company may repurchase portions of its 6% Subordinated Debentures through open market transactions or through privately negotiated transactions.

Market Risks

The Company is exposed to market risks from changes in raw material and energy costs, interest rates, and foreign currency exchange rates.  To reduce such risks, the Company may periodically use financial instruments.  Hedging transactions are authorized and executed pursuant to policies and procedures.  Further, the Company does not buy or sell financial instruments for trading purposes.  A discussion of the Company’s accounting for derivative instruments and hedging activities is included in the Summary of Significant Accounting Policies in the Notes to Consolidated Financial Statements.

Cost and Availability of Raw Materials and Energy

Raw materials, primarily copper and brass, represent the largest component of the Company’s variable costs of production.  The cost of these materials is subject to global market fluctuations caused by factors beyond the Company’s control.  Significant increases in the cost of metal, to the extent not reflected in prices for the Company’s finished products, or the lack of availability could materially and adversely affect the Company’s business, results of operations and financial condition.

The Company occasionally enters into forward fixed-price arrangements with certain customers.  The Company may utilize futures contracts to hedge risks associated with forward fixed-price arrangements.  The Company may also utilize futures contracts to manage price risk associated with inventory.  Depending on the nature of the hedge, changes in the fair value of the futures contracts will either be offset against the change in fair value of the inventory through earnings or recognized as a component of accumulated other comprehensive income (OCI) and reflected in earnings upon the sale of inventory.  Periodic value fluctuations of the contracts generally offset the value fluctuations of the underlying fixed-price transactions or inventory.  At year-end, the Company held open futures contracts to purchase approximately $10.5 million of copper over the next twelve months related to fixed-price sales orders.

Futures contracts may also be used to manage price risk associated with natural gas purchases.  The effective portion of gains and losses with respect to these positions are deferred in equity as a component of OCI and reflected in earnings upon consumption of natural gas.  Periodic value fluctuations of the contracts generally offset the value fluctuations of the underlying natural gas prices.  There were no open contracts to purchase natural gas at December 25, 2010.

Interest Rates

At December 25, 2010 and December 26, 2009, the fair value of the Company’s debt was estimated at $189.9 million and $181.8 million, respectively, primarily using market yields and taking into consideration the underlying terms of the debt.  Such fair value was less than the carrying value of debt at December 25, 2010 and December 26, 2009 by $0.4 million and $0.7 million, respectively.  Market risk is estimated as the potential change in fair value resulting from a hypothetical 10 percent decrease in interest rates and amounted to $2.8 million at December 25, 2010 and $3.4 million at December 26, 2009.

The Company had variable-rate debt outstanding of $42.1 million at December 25, 2010 and $34.4 million at December 26, 2009.  At these borrowing levels, a hypothetical 10 percent increase in interest rates would have had an insignificant unfavorable impact on the Company’s pre-tax earnings and cash flows.  The primary interest rate exposures on floating-rate debt are based on LIBOR and the base-lending rate published by the People’s Bank of China.
 
F-8

 
Index
 
Foreign Currency Exchange Rates

Foreign currency exposures arising from transactions include firm commitments and anticipated transactions denominated in a currency other than an entity’s functional currency.  The Company and its subsidiaries generally enter into transactions denominated in their respective functional currencies.  The Company may utilize certain futures contracts or forward contracts with financial institutions to hedge foreign currency transactional exposures.  Gains and losses with respect to these positions are deferred in equity as a component of OCI and reflected in earnings upon collection of receivables.  At December 25, 2010, the Company had open forward contracts with a financial institution to sell approximately $3.6 million Canadian dollars through February 2011.

The Company’s primary foreign currency exposure arises from foreign-denominated revenues and profits and their translation into U.S. dollars.  The primary currencies to which the Company is exposed include the Canadian dollar, the British pound sterling, the euro, the Mexican peso, and the Chinese renminbi.  The Company generally views as long-term its investments in foreign subsidiaries with a functional currency other than the U.S. dollar.  As a result, the Company generally does not hedge these net investments.  The net investment in foreign subsidiaries translated into U.S. dollars using the year-end exchange rates was $188.2 million at December 25, 2010 and $150.9 million at December 26, 2009.  The potential loss in value of the Company’s net investment in foreign subsidiaries resulting from a hypothetical 10 percent adverse change in quoted foreign currency exchange rates at December 25, 2010 and December 26, 2009 amounted to $18.8 million and $15.1 million, respectively.  This change would be reflected in the foreign currency translation component of OCI in the equity section of the Company’s Consolidated Balance Sheets, until the foreign subsidiaries are sold or otherwise disposed.

During 2010, exchange rates with respect to many foreign currencies fluctuated significantly with respect to the U.S. dollar.  The Company has significant investments in foreign operations whose functional currency is the British pound sterling and the Mexican peso.  The British pound sterling decreased approximately three percent and the Mexican peso increased approximately five percent relative to the U.S. dollar during 2010.  The resulting foreign currency translation gains and losses are recorded as a component of OCI.

Critical Accounting Policies and Estimates

The Company’s Consolidated Financial Statements are prepared in accordance with accounting principles generally accepted in the United States.  Application of these principles requires the Company to make estimates, assumptions, and judgments that affect the amounts reported in the Consolidated Financial Statements.  Management believes the most complex and sensitive judgments, because of their significance to the Consolidated Financial Statements, result primarily from the need to make estimates about the effects of matters which are inherently uncertain.  The accounting policies and estimates that are most critical to aid in understanding and evaluating the results of operations and financial position of the Company include the following:

Inventory Valuation

The Company’s inventories are valued at the lower-of-cost-or-market.  The material component of its U.S. copper tube and copper fittings inventories is valued on a LIFO basis.  Other manufactured inventories, including the non-material components of U.S. copper tube and copper fittings, are valued on a FIFO basis.  Certain inventories purchased for resale are valued on an average cost basis.  Elements of cost in finished goods inventory in addition to the cost of material include depreciation, amortization, utilities, consumable production supplies, maintenance, production wages, and transportation costs.

The market price of copper cathode and scrap are subject to volatility.  During periods when open market prices decline below net book value, the Company may need to provide an allowance to reduce the carrying value of its inventory.  In addition, certain items in inventory may be considered obsolete and, as such, the Company may establish an allowance to reduce the carrying value of those items to their net realizable value.  Changes in these estimates related to the value of inventory, if any, may result in a materially adverse impact on the Company’s reported financial position or results of operations.  The Company recognizes the impact of any changes in estimates, assumptions, and judgments in income in the period in which it is determined.
 
F-9

 
Index
 
Goodwill

Goodwill represents cost in excess of fair values assigned to the underlying net assets of acquired businesses.  Goodwill is subject to impairment testing, which is performed by the Company as of the first day of the fourth quarter of each fiscal year, unless circumstances dictate more frequent testing.  For testing purposes, the Company uses components of its operating segments; components of a segment having similar economic characteristics are combined.  The annual impairment test is a two-step process.  The first step is the estimation of fair value of reporting units that have goodwill.  If this estimate indicates that impairment potentially exists, the second step (step two) is performed.  Step two, used to measure the amount of goodwill impairment loss, compares the implied fair value of goodwill to the carrying value.  In step two the Company is required to allocate the fair value of each reporting unit, as determined in step one, to the fair value of the reporting unit’s assets and liabilities, including unrecognized intangible assets and corporate allocation where applicable, in a hypothetical purchase price allocation as if the reporting unit had been purchased on that date.  If the implied fair value of goodwill is less than the carrying value, an impairment charge is recorded.  Inputs to that model include various estimates, including cash flow projections and assumptions.  Some of the inputs are highly subjective and are affected by changes in business conditions and other factors.  Changes in any of the inputs could have an effect on future tests and result in material impairment charges.

Income Taxes

Deferred income tax assets and liabilities are recognized when differences arise between the treatment of certain items for financial statement and tax purposes.  Realization of certain components of deferred tax assets is dependent upon the occurrence of future events.  The Company records valuation allowances to reduce its deferred tax assets to the amount it believes is more likely than not to be realized.  These valuation allowances can be impacted by changes in tax laws, changes to statutory tax rates, and future taxable income levels and are based on the Company’s judgment, estimates, and assumptions.  In the event the Company were to determine that it would not be able to realize all or a portion of the net deferred tax assets in the future, the Company would increase the valuation allowance through a charge to income tax expense in the period that such determination is made.  Conversely, if the Company were to determine that it would be able to realize its deferred tax assets in the future, in excess of the net carrying amounts, the Company would decrease the recorded valuation allowance through a decrease to income tax expense in the period that such determination is made.

The Company provides for uncertain tax positions and the related interest and penalties, if any, based upon management’s assessment of whether a tax benefit is more likely than not to be sustained upon examination by tax authorities.  Tax benefits for uncertain tax positions that are recognized in the financial statements are measured as the largest amount of benefit, determined on a cumulative probability basis, that is more likely than not to be realized upon ultimate settlement.  To the extent the Company prevails in matters for which a liability for an uncertain tax position is established or is required to pay amounts in excess of the liability, the Company’s effective tax rate in a given financial statement period may be affected.

Environmental Reserves

The Company recognizes an environmental liability when it is probable the liability exists and the amount is reasonably estimable.  The Company estimates the duration and extent of its remediation obligations based upon reports of outside consultants; internal analyses of clean-up costs, and ongoing monitoring costs; communications with regulatory agencies; and changes in environmental law.  If the Company were to determine that its estimates of the duration or extent of its environmental obligations were no longer accurate, the Company would adjust its environmental liabilities accordingly in the period that such determination is made.  Estimated future expenditures for environmental remediation are not discounted to their present value.  Accrued environmental liabilities are not reduced by potential insurance reimbursements.

Environmental expenses that relate to ongoing operations are included as a component of cost of goods sold.  Environmental expenses related to non-operating properties are included in other (expense) income, net in the Consolidated Statements of Income.
 
F-10

 
Index
 
Allowance for Doubtful Accounts

The Company provides an allowance for receivables that may not be fully collected.  In circumstances where the Company is aware of a customer’s inability to meet its financial obligations (e.g., bankruptcy filings or substantial downgrading of credit ratings), it records a reserve for bad debts against amounts due to reduce the net recognized receivable to the amount it believes most likely will be collected.  For all other customers, the Company recognizes reserves for bad debts based on its historical collection experience.  If circumstances change (e.g., greater than expected defaults or an unexpected material change in a major customer’s ability to meet its financial obligations), the Company’s estimate of the recoverability of amounts due could be changed by a material amount.


Cautionary Statement Regarding Forward-Looking Information

This Annual Report contains various forward-looking statements and includes assumptions concerning the Company’s operations, future results, and prospects.  These forward-looking statements are based on current expectations and are subject to risk and uncertainties.  In connection with the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, the Company provides the following cautionary statement identifying important economic, political, and technological factors, among others, the absence of which could cause actual results or events to differ materially from those set forth in or implied by the forward-looking statements and related assumptions.

In addition to those factors discussed under “Risk Factors” in this Annual Report on Form 10-K, such factors include: (i) the current and projected future business environment, including interest rates and capital and consumer spending; (ii) the domestic housing and commercial construction industry environment; (iii) the impact of the recent economic decline; (iv) availability and price fluctuations in commodities (including copper, natural gas, and other raw materials, including crude oil that indirectly affects plastic resins); (v) competitive factors and competitor responses to the Company’s initiatives; (vi) stability of government laws and regulations, including taxes; (vii) availability of financing; and (viii) continuation of the environment to make acquisitions, domestic and foreign, including regulatory requirements and market values of candidates.
 
F-11

 
Index
 
MUELLER INDUSTRIES, INC.
CONSOLIDATED STATEMENTS OF INCOME
Years Ended December 25, 2010, December 26, 2009, and December 27, 2008

(In thousands, except per share data)
 
2010
   
2009
   
2008
 
                         
Net sales
 
$
2,059,797
   
$
1,547,225
   
$
2,558,448
 
                         
Cost of goods sold
   
1,774,811
     
1,327,022
     
2,233,123
 
Depreciation and amortization
   
40,364
     
41,568
     
44,345
 
Selling, general, and administrative expense
   
131,211
     
116,660
     
136,884
 
Insurance settlements
   
(22,736
)
   
     
 
Impairment charges
   
     
29,755
     
18,000
 
                         
Operating income
   
136,147
     
32,220
     
126,096
 
                         
Interest expense
   
(11,647
)
   
(9,963
)
   
(19,050
)
Other (expense) income, net
   
(2,650
)
   
872
     
13,896
 
                         
Income before income taxes
   
121,850
     
23,129
     
120,942
 
                         
Income tax expense
   
(34,315
)
   
(17,792
)
   
(38,332
)
                         
Consolidated net income
   
87,535
     
5,337
     
82,610
 
                         
Less net income attributable to noncontrolling interest
   
(1,364
)
   
(662
)
   
(1,796
)
                         
Net income attributable to Mueller Industries, Inc.
 
$
86,171
   
$
4,675
   
$
80,814
 
                         
Weighted average shares for basic earnings per share
   
37,672
     
37,336
     
37,123
 
Effect of dilutive stock-based awards
   
97
     
88
     
186
 
                         
Adjusted weighted average shares for diluted earnings per share
   
37,769
     
37,424
     
37,309
 
                         
Basic earnings per share
 
$
2.29
   
$
0.13
   
$
2.18
 
                         
Diluted earnings per share
 
$
2.28
   
$
0.12
   
$
2.17
 
                         
Dividends per share
 
$
0.40
   
$
0.40
   
$
0.40
 
                         
See accompanying notes to consolidated financial statements.
 

 
F-12

 
Index
 
MUELLER INDUSTRIES, INC.
CONSOLIDATED BALANCE SHEETS
As of December 25, 2010 and December 26, 2009

(In thousands, except share data)
 
2010
   
2009
 
Assets
           
Current assets:
           
Cash and cash equivalents
 
$
394,139
   
$
346,001
 
Accounts receivable, less allowance for doubtful accounts of $5,447 in 2010 and $5,947 in 2009
   
269,258
     
228,739
 
Inventories
   
209,892
     
191,262
 
Current deferred income taxes
   
19,227
     
18,491
 
Other current assets
   
19,798
     
24,350
 
                 
Total current assets
   
912,314
     
808,843
 
                 
Property, plant, and equipment, net
   
229,498
     
250,395
 
Goodwill
   
102,250
     
102,250
 
Other assets
   
14,934
     
18,653
 
                 
Total Assets
 
$
1,258,996
   
$
1,180,141
 
                 
Liabilities
           
Current liabilities:
           
Current portion of debt
 
$
32,020
   
$
24,325
 
Accounts payable
   
67,849
     
73,837
 
Accrued wages and other employee costs
   
33,338
     
24,829
 
Other current liabilities
   
61,920
     
60,379
 
                 
Total current liabilities
   
195,127
     
183,370
 
                 
Long-term debt, less current portion
   
158,226
     
158,226
 
Pension liabilities
   
18,249
     
20,715
 
Postretirement benefits other than pensions
   
22,690
     
23,605
 
Environmental reserves
   
23,902
     
23,268
 
Deferred income taxes
   
24,081
     
31,128
 
Other noncurrent liabilities
   
824
     
887
 
                 
Total liabilities
   
443,099
     
441,199
 
                 
Equity
               
Mueller Industries, Inc. stockholders' equity:
               
Preferred stock - $1.00 par value; shares authorized 5,000,000; none outstanding
   
     
 
Common stock - $.01 par value; shares authorized 100,000,000; issued 40,091,502; outstanding 37,854,760 in 2010 and 37,649,584 in 2009
   
401
     
401
 
Additional paid-in capital
   
263,233
     
262,166
 
Retained earnings
   
611,279
     
540,218
 
Accumulated other comprehensive loss
   
(37,046
)
   
(36,104
)
Treasury common stock, at cost
   
(49,131
)
   
(53,514
)
                 
Total Mueller Industries, Inc. stockholders' equity
   
788,736
     
713,167
 
Noncontrolling interest
   
27,161
     
25,775
 
                 
          Total equity
   
815,897
     
738,942
 
                 
Commitments and contingencies
   
     
 
                 
Total Liabilities and Equity
 
$
1,258,996
   
$
1,180,141
 
                 
See accompanying notes to consolidated financial statements.
 

 
F-13

 
Index
 
MUELLER INDUSTRIES, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
Years Ended December 25, 2010, December 26, 2009, and December 27, 2008

(In thousands)
 
2010
   
2009
   
2008
 
Operating activities:
                 
Consolidated net income
 
$
87,535
   
$
5,337
   
$
82,610
 
Reconciliation of net income to net cash provided by operating activities:
                       
Depreciation
   
39,656
     
40,867
     
43,666
 
Amortization of intangibles
   
708
     
701
     
679
 
Amortization of Subordinated Debenture costs
   
288
     
190
     
539
 
Stock-based compensation expense
   
2,877
     
2,633
     
2,915
 
Insurance settlements
   
(22,736
)
   
     
 
Insurance proceeds – noncapital related
   
5,561
     
7,338
     
4,954
 
Income tax benefit from exercise of stock options
   
(145
)
   
(203
)
   
(92
)
Impairment charges
   
     
29,755
     
18,000
 
Deferred income taxes
   
(6,627
)
   
(2,554
)
   
(4,465
)
Provision for doubtful accounts receivable
   
4,763
     
506
     
2,654
 
Gain on early retirement of debt
   
     
(128
)
   
(21,575
)
Loss on disposal of properties
   
756
     
683
     
598
 
Changes in assets and liabilities, net of business acquired:
                       
Receivables
   
(46,494
)
   
(6,988
)
   
89,051
 
Inventories
   
(17,248
)
   
22,699
     
44,591
 
Other assets
   
2,974
     
(505
)
   
(3,027
)
Current liabilities
   
4,913
     
(21,161
)
   
(89,538
)
Other liabilities
   
(623
)
   
(1,808
)
   
12,741
 
Other, net
   
199
     
26
     
1,459
 
                         
Net cash provided by operating activities
   
56,357
     
77,388
     
185,760
 
                         
Investing activities:
                       
Capital expenditures
   
(18,678
)
   
(13,942
)
   
(22,261
)
Acquisition of business
   
(2,021
)
   
     
 
Proceeds from sales of properties
   
71
     
611
     
81
 
Net (deposits into) withdrawals from restricted cash balances
   
(156
)
   
7,013
     
(10,945
)
Insurance proceeds
   
18,798
     
     
 
                         
Net cash used in investing activities
   
(1,986
)
   
(6,318
)
   
(33,125
)
                         
Financing activities:
                       
Repayments of long-term debt
   
     
(370
)
   
(126,877
)
Dividends paid to stockholders of Mueller Industries, Inc.
   
(15,074
)
   
(14,944
)
   
(14,847
)
Dividends paid to noncontrolling interests
   
(741
)
   
(1,449
)
   
 
Issuance (repayment) of debt by joint venture, net
   
6,848
     
131
     
(25,564
)
Acquisition of treasury stock
   
(418
)
   
(870
)
   
(32
)
Issuance of shares under incentive stock option plans from treasury
   
2,846
     
9,145
     
1,167
 
Income tax benefit from exercise of stock options
   
145
     
203
     
92
 
                         
Net cash used in financing activities
   
(6,394
)
   
(8,154
)
   
(166,061
)
                         
Effect of exchange rate changes on cash
   
161
     
4,225
     
(16,332
)
                         
Increase (decrease) in cash and cash equivalents
   
48,138
     
67,141
     
(29,758
)
Cash and cash equivalents at the beginning of the year
   
346,001
     
278,860
     
308,618
 
                         
Cash and cash equivalents at the end of the year
 
$
394,139
   
$
346,001
   
$
278,860
 
                         
For supplemental disclosures of cash flow information, see Notes 1, 5, 7, and 14.
 
See accompanying notes to consolidated financial statements.
 

 
F-14

 
Index
 
MUELLER INDUSTRIES, INC.
CONSOLIDATED STATEMENTS OF CHANGES IN EQUITY
Years Ended December 25, 2010, December 26, 2009, and December 27, 2008

   
2010
   
2009
   
2008
 
(In thousands) 
 
Shares
   
Amount
   
Shares
   
Amount
   
Shares
   
Amount
 
Common stock:
                                   
Balance at beginning of year
   
40,092
   
$
401
     
40,092
   
$
401
     
40,092
   
$
401
 
Balance at end of year
   
40,092
   
$
401
     
40,092
   
$
401
     
40,092
   
$
401
 
                                                 
Additional paid-in capital:
                                               
Balance at beginning of year
         
$
262,166
           
$
262,378
           
$
259,611
 
Issuance of shares under incentive stock option plans
           
(394
)
           
(1,295
)
           
(240
)
Stock-based compensation expense
           
2,877
             
2,633
             
2,915
 
Income tax benefit from exercise of stock options
           
145
             
203
             
92
 
Write-off of excess tax benefits arising from the exercise of stock options
           
             
(353
)
           
 
Issuance of restricted stock
           
(1,561
)
           
(1,400
)
           
 
                                                 
Balance at end of year
         
$
263,233
           
$
262,166
           
$
262,378
 
                                                 
Retained earnings: 
                                               
Balance at beginning of year
         
$
540,218
           
$
550,501
           
$
484,534
 
Net income attributable to Mueller Industries, Inc.
           
86,171
             
4,675
             
80,814
 
Dividends paid or payable to stockholders of Mueller Industries, Inc.
           
(15,110
)
           
(14,958
)
           
(14,847
)
                                                 
Balance at end of year
         
$
611,279
           
$
540,218
           
$
550,501
 
                                                 
Accumulated other comprehensive (loss) income:
                                               
Foreign currency translation
         
$
(977
)
         
$
13,278
           
$
(51,701
)
Net change with respect to derivative instruments and hedging activities, net of tax of $(191), $(1,794), and $1,347
           
376
             
4,097
             
(3,819
)
Net actuarial loss on pension and postretirement obligations, net of tax of $1,631, $2,138, and $14,867