SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended December 28, 2002 Commission file number 1-6770 MUELLER INDUSTRIES, INC. (Exact name of registrant as specified in its charter) Delaware 25-0790410 (State or other jurisdiction (I.R.S. Employer of incorporation or organization) Identification No). 8285 Tournament Drive, Suite 150 Memphis, Tennessee 38125 (Address of principal executive offices) Registrant's telephone number, including area code: (901) 753-3200 Securities registered pursuant to Section 12(b) of the Act: Name of each exchange Title of each class on which registered Common Stock, $0.01 Par Value New York Stock Exchange Securities registered pursuant to Section 12(g) of the Act: None Indicate by a check mark whether the registrant (1) has filed all reports required to be filed by section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes X No Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (Section 229.405 of this chapter) is not contained herein, and will not be contained, to the best of Registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.[X] Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Exchange Act). Yes X No The number of shares of the Registrant's common stock outstanding as of March 12, 2003 was 34,257,419 excluding 5,834,083 treasury shares. The aggregate market value of the 33,692,817 shares of common stock held by non- affiliates of the Registrant was $781,336,426 at March 12, 2003 (based on the closing price on the consolidated transaction reporting system on that date). DOCUMENTS INCORPORATED BY REFERENCE Portions of the following documents are incorporated by reference into this Report: (1) Registrant's Annual Report to Stockholders for the year ended December 28, 2002 (Part I and II); Registrant's Definitive Proxy Statement for the 2003 Annual Meeting of Stockholders, scheduled to be mailed on or about March 24, 2003 (Part III). -1- MUELLER INDUSTRIES, INC. --------------------- As used in this report, the terms "Company", "Mueller" and "Registrant" mean Mueller Industries, Inc. and its consolidated subsidiaries taken as a whole, unless the context indicates otherwise. -------------------- TABLE OF CONTENTS Page Part I Item 1. Business 3 Item 2. Properties 9 Item 3. Legal Proceedings 11 Item 4. Submission of Matters to a Vote of Security Holders 11 Part II Item 5. Market for the Registrant's Common Stock and Related Stockholder Matters 11 Item 6. Selected Financial Data 11 Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations 12 Item 7A. Quantitative and Qualitative Disclosures About Market Risk 12 Item 8. Financial Statements and Supplementary Data 12 Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure 12 Part III Item 10. Directors and Executive Officers of the Registrant 12 Item 11. Executive Compensation 12 Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters 13 Item 13. Certain Relationships and Related Transactions 15 Item 14. Controls and Procedures 15 Part IV Item 15. Exhibits, Financial Statement Schedules and Reports on Form 8-K 15 Signatures 18 -2- PART I ITEM 1. BUSINESS Introduction The Company is a leading manufacturer of copper, brass, plastic, and aluminum products. The range of these products is broad: copper tube and fittings; brass and copper alloy rod, bar, and shapes; aluminum and brass forgings; aluminum and copper impact extrusions; plastic fittings and valves; refrigeration valves and fittings; and fabricated tubular products. Mueller's operations are located throughout the United States, and in Canada, Mexico, and Great Britain. The Company's businesses are managed and organized into two segments: Standard Products Division ("SPD") and Industrial Products Division ("IPD"). SPD manufactures and sells copper tube, copper and plastic fittings, and valves. Outside of the United States, SPD manufactures and sells copper tube in Europe. SPD sells these products to wholesalers in the HVAC (heating, ventilation, and air-conditioning), plumbing, and refrigeration markets, to distributors to the manufactured housing and recreational vehicle industries, and to building material retailers. IPD manufactures and sells brass and copper alloy rod, bar, and shapes; aluminum and brass forgings; aluminum and copper impact extrusions; refrigeration valves and fittings; fabricated tubular products; and gas valves and assemblies. IPD sells its products primarily to original equipment manufacturers ("OEMs"), many of which are in the HVAC, plumbing, and refrigeration markets. The majority of the Company's manufacturing facilities operated at moderate levels during 2002, and high levels in 2001, and 2000. During 2002, the Company sold its wholly owned subsidiary, Utah Railway Company. Certain expenses related primarily to retiree benefits at inactive operations were formerly combined with the operations of Utah Railway Company under a third industry segment, Other Businesses. Following the sale of Utah Railway Company and its classification as discontinued operations, these expenses of inactive operations have been combined into the unallocated expenses classification. Information concerning segments appears under "Note 15 - Industry Segments" in the Notes to Consolidated Financial Statements in Mueller's Annual Report to Stockholders for the year ended December 28, 2002. Such information is incorporated herein by reference. Standard Products Division Mueller's Standard Products Division includes a broad line of copper tube, which ranges in size from 1/8 inch to 8 inch diameter, and is sold in various straight lengths and coils. Mueller is a market leader in the air- conditioning and refrigeration tube markets. Additionally, Mueller supplies a variety of water tube in straight lengths and coils used for plumbing applications in virtually every type of construction project. -3- SPD also includes copper and plastic fittings and related components for the plumbing and heating industry that are used in water distribution systems, heating systems, air-conditioning, and refrigeration applications, and drainage, waste, and vent systems. A major portion of Mueller's products are ultimately used in the domestic residential and commercial construction markets and, to a lesser extent, in the automotive and heavy on and off-the- road vehicle markets. On September 27, 2002, the Company acquired certain assets of Colonial Engineering, Inc.'s Fort Pierce, Florida operations. These operations manufacture injected molded plastic pressure fittings for plumbing, agricultural, and industrial use including a line of PVC Schedule 40 and 80 and CPVC fittings. During 1998, the Company acquired Halstead Industries, Inc. ("Halstead"). Halstead operates a tube mill in Wynne, Arkansas. Halstead also operated a line sets factory in Clinton, Tennessee, which was moved to Wynne, Arkansas in 2001. This acquisition expanded the Company's copper tube and line sets businesses and created opportunities for improved production and distribution efficiency. Following the acquisition, Halstead's name was changed to Mueller Copper Tube Products, Inc. Also in 1998, the Company acquired B&K Industries, Inc. ("B&K"), an importer and distributor of residential and commercial plumbing products. The acquisition of B&K facilitated the sale of Mueller's manufactured products in the large, and growing, retail marketplace. In December 2002, the Company initiated a plan to sell or liquidate its French manufacturing operations, Mueller Europe S. A. Subsequent to year- end, on March 3, 2003, Mueller Europe S.A. filed a petition for liquidation with the Commercial Court of Provins Province, France and, on March 4, the Court declared the entity to be in liquidation. The disposition of remaining assets and obligations of Mueller Europe S.A. is under the jurisdiction of the Court. SPD markets primarily through its own sales and distribution organization, which maintains sales offices and distribution centers throughout the United States and in Canada, Mexico, and Europe. As of the beginning of 2003, the Company also maintains a sales office in Hong Kong. Additionally, products are sold and marketed through a network of agents, which, when combined with the Company's sales organization, provide the Company broad geographic market representation. The businesses in which SPD is engaged are highly competitive. The principal methods of competition for Mueller's products are customer service, availability, and price. The total amount of order backlog for SPD as of December 28, 2002 was not significant. The Company competes with various companies, depending on the product line. In the U.S. copper tubing business, the domestic competition includes Cerro Copper Products Co., Inc., Reading Tube Corporation, and Wolverine Tube, Inc., as well as many actual and potential foreign competitors. In the European copper tubing business, Mueller competes with more than ten European- based manufacturers of copper tubing as well as foreign-based manufacturers. -4- Additionally, the Company's copper tube businesses compete with a large number of manufacturers of substitute products made from plastic, iron, and steel. In the copper fittings market, competitors include Elkhart Products, a division of Amcast Industrial Corporation, and NIBCO, Inc., as well as several foreign manufacturers. The plastic fittings competitors include NIBCO, Inc., Charlotte Pipe & Foundry, and other companies. No single competitor offers such a wide-ranging product line. Management believes that this is a competitive advantage in some markets. Industrial Products Division Mueller's Industrial Products Division includes brass rod, nonferrous forgings, and impact extrusions that are sold primarily to OEMs in the plumbing, refrigeration, fluid power, and automotive industries, as well as to other manufacturers and distributors. The Port Huron, Michigan mill extrudes brass, bronze, and copper alloy rod in sizes ranging from 3/8 inches to 4 inches in diameter. These alloys are used in applications that require a high degree of machinability, wear and corrosion resistance, and electrical conductivity. IPD also manufactures brass and aluminum forgings which are used in a wide variety of end products, including automotive components, brass fittings, industrial machinery, valve bodies, gear blanks, and computer hardware. The Company also serves the automotive, military ordnance, aerospace, and general manufacturing industries with cold-formed aluminum and copper impact extrusions. Typical applications for impacts are high strength ordnance, high-conductivity electrical components, builders' hardware, hydraulic systems, automotive parts, and other uses where toughness must be combined with varying complexities of design and finish. Other products include valves and custom OEM products for refrigeration and air-conditioning applications, and shaped and formed tube, produced to tight tolerances, for baseboard heating, appliances, and medical instruments. The total amount of order backlog for IPD as of December 28, 2002 was not significant. On August 21, 2002, the Company acquired 100 percent of the outstanding stock of Overstreet-Hughes, Co., Inc. Overstreet-Hughes, located in Carthage, Tennessee, manufactures precision tubular components and assemblies primarily for the OEM air-conditioning market. During 2000, the Company completed two acquisitions: (i) Micro Gauge, Inc. and a related business, Microgauge Machining, Inc., a specialized machining operation, and (ii) Propipe Technologies, Inc., a fabricator of gas train manifold systems. In 1998, the Company acquired Lincoln Brass Works, Inc. ("Lincoln"), which operates manufacturing facilities in Jacksboro, Tennessee and Waynesboro, Tennessee. Lincoln produces custom control valve assemblies, custom metal assemblies, gas delivery systems, and tubular products primarily for the gas appliance market. Lincoln is a large consumer of the Company's brass rod and forgings. IPD primarily sells directly to OEM customers. Competitors, primarily in the brass rod market, include Cerro Metal Products Company, Inc., Chase Industries, Inc., a subsidiary of Olin Corporation, Extruded Metals Inc., and others both domestic and foreign. Outside of North America, IPD sells products through various channels. -5- Labor Relations At December 28, 2002, the Company employed approximately 3,600 employees at its ongoing operations, of which approximately 1,400 were represented by various unions. The union contract at the Company's U.K. operation is renewed annually. Other contracts expire on various dates through September 2005. Raw Material and Energy Availability The major portion of Mueller's base metal requirements (primarily copper) is normally obtained through short-term supply contracts with competitive pricing provisions (for cathode) and the open market (for scrap). Other raw materials used in the production of brass, including brass scrap, zinc, tin, and lead, are obtained from zinc and lead producers, open-market dealers, and customers with brass process scrap. Raw materials used in the fabrication of aluminum and plastic products are purchased in the open market from major producers. Adequate supplies of raw material are available to the Company. Sufficient energy in the form of natural gas, fuel oils, and electricity is available to operate the Company's production facilities. While temporary shortages of raw material and fuels may occur occasionally, they have not materially hampered the Company's operations. Environmental Matters Compliance with environmental laws and regulations is a matter of high priority. Mueller's provision for environmental compliance includes charges of $1.6 million in 2002, $3.6 million in 2001, and $2.0 million in 2000. Except as discussed below, the Company does not anticipate that it will need to make material expenditures for such compliance activities during the remainder of the 2003 fiscal year, or for the next two fiscal years. Mining Remedial Recovery Company Mining Remedial Recovery Company ("MRRC"), a wholly owned subsidiary, was formed for the purpose of managing the remediation of certain properties and the appropriate disposition thereof. Mammoth Mine Site MRRC owns certain inactive mines in Shasta County, California. MRRC has continued a program, begun in the late 1980s, of sealing mine portals with concrete plugs in mine adits which were discharging water. The sealing program has achieved a reduction in the metal load in discharges from these adits; however, additional reductions are being required. In response to a 1996 Order issued by the California Regional Water Quality Control Board ("QCB"), MRRC completed a feasibility study in 1997 describing measures designed to mitigate the effects of acid rock drainage. In December 1998, the QCB modified the order extending MRRC's time to comply with water quality standards until December 1, 2003. In September 2002, the QCB adopted a new order requiring MRRC to adopt Best Management Practices (BMP) to control discharges of acid mine drainage. The new order extends the time to comply with water quality standards until September 2007. MRRC has agreed to implement BMP to reduce or prevent the discharge of acid mine drainage until -6- such point as compliance with the order is achieved or, through the Use Attainability Analysis (UAA) process, succeed in modifying the designated, beneficial uses of the respective watercourses, allowing for the adoption of alternative receiving water limits. MRRC estimates it will spend between $0.5 and $1.0 million annually over the next several years to comply with the order. U.S.S. Lead In 1991, U.S.S. Lead Refinery, Inc. ("Lead Refinery") responded to an information request from the EPA under Superfund for information on whether Lead Refinery arranged for the disposal of hazardous substances in the vicinity of the Grand Calumet River/Indiana Harbor Ship Canal. By letter dated February 4, 1997, the Indiana Department of Environmental Management ("IDEM") notified Lead Refinery that a preassessment screening of the Grand Calumet River and the Indiana Harbor Canal conducted pursuant to Superfund had identified releases of hazardous substances from Lead Refinery and other potentially responsible parties ("PRPs") that had adversely impacted natural resources. Based on its prescreening work, IDEM performed sampling in this area and initiated an assessment plan, which will determine the nature and extent of any required remediation and any resulting assessments against any of the PRPs. In 1991, Lead Refinery also responded to an information request under Superfund regarding the site in East Chicago, Indiana. In 1992, the EPA advised Lead Refinery of its intent to list the property as a Superfund site; however, as of March 23, 2001, the EPA had deferred such listing. In 1993, Lead Refinery entered into a Consent Order with the EPA pursuant to Section 3008(h) of the Resource Conservation and Recovery Act ("RCRA"). The Consent Order covers remediation activities at the East Chicago, Indiana site and provides for Lead Refinery to complete certain on-site interim remedial activities and studies that extend off-site. In November 1996, the EPA approved, with modifications, the Interim Stabilization Measures Workplan and designated a Corrective Action Management Unit ("CAMU") at the Lead Refinery site. Site activities, which began in December 1996, were substantially concluded in the fourth quarter of 2002. Costs for remaining cleanup efforts are estimated to be between $0.5 and $1.0 million. In the process of remediating the site, Lead Refinery identified petroleum contamination on site. As a result, Lead Refinery installed a slurry wall around the CAMU and initiated characterization of areas suspected to have petroleum contamination. Lead Refinery has addressed this contamination pursuant to plans approved by the EPA. Additionally, Lead Refinery has conducted initial investigations to determine if other contamination exists that is not addressed by the Consent Order. Lead Refinery, without additional assistance from MRRC, lacks the financial resources needed to complete any additional remediation determined to be required and intends to seek financial assistance from other PRPs to permit Lead Refinery to conduct a private-party cleanup under RCRA, to the extent available under applicable law and regulations. Lead Refinery has been informed by the former owner and operator of a Superfund site located in Pedricktown, New Jersey that it intends to seek CERCLA response costs for alleged shipments of hazardous substances to the site. Lead Refinery has executed an agreement regarding that site, which indefinitely extends the statute of limitations. By letter dated January 26, -7- 1996, Lead Refinery and other PRPs received from the EPA a proposed Administrative Order on Consent to perform the remedial design for operable Unit 1 of the Pedricktown Superfund Site. Lead Refinery determined not to execute the Administrative Order on Consent. Several other PRPs, however, executed the agreement and are conducting the remedial design. Other In 1998 and 1997, in connection with acquisitions, the Company established environmental reserves to fund the cost of remediation at sites currently or formerly owned by various acquired entities. The Company, through its acquired subsidiaries, is engaged in ongoing remediation and site characterization studies. Mueller Copper Tube Products, Inc. In 1999, Mueller Copper Tube Products, Inc. ("MCTP") commenced a cleanup and remediation of soil and groundwater at its Wynne, Arkansas plant. MCTP is currently removing trichloroethene, a cleaning solvent formerly used by MCTP, from the soil and groundwater. On August 30, 2000, MCTP received approval of its Final Comprehensive Investigation report and Storm Water Drainage Investigation Report addressing the treatment of soils and groundwater, from the Arkansas Department of Environmental Quality. The Company established a reserve for this project in connection with the acquisition of MCTP. Other Business Factors The Registrant's business is not materially dependent on patents, trademarks, licenses, franchises, or concessions held. In addition, expenditures for company-sponsored research and development activities were not material during 2002, 2001, or 2000. No material portion of the Registrant's business involves governmental contracts. SEC Filings We make available through our Internet Web site our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission. To retrieve any of this information, you may access our Internet home page at www.muellerindustries.com, select Mueller Financials, and then select SEC Filings. -8- ITEM 2. PROPERTIES Information pertaining to the Registrant's major operating facilities is included below. Except as noted, the Registrant owns all of its principal properties. The Registrant's plants are in satisfactory condition and are suitable for the purpose for which they were designed and are now being used. Approximate Location Property Size Description Fulton, MS 418,000 sq. ft. Copper tube mill. Facility includes 52.37 acres casting, extruding, and finishing equipment to produce copper tubing, including tube feed stock for the Company's copper fittings plants and Precision Tube factory. Fulton, MS 103,000 sq. ft. Casting facility. Facility includes 11.9 acres casting equipment to produce copper billets used in the adjoining copper tube mill. Wynne, AR 682,000 sq. ft.(1) Copper tube mill. Facility includes 39.2 acres extrusion and finishing equipment to produce copper tubing and copper tube line sets. Fulton, MS 58,500 sq. ft. Packaging and bar coding facility for 15.53 acres retail channel sales. Fulton, MS 70,000 sq. ft.(2) Copper fittings plant. High-volume 7.68 acres facility that produces copper fittings using tube feed stock from the Company's adjacent copper tube mill. Covington, TN 159,500 sq. ft. Copper fittings plant. Facility 40.88 acres produces copper fittings using tube feed stock from the Company's copper tube mills. Port Huron, MI 40,000 sq. ft. Formed tube plant. Produces copper 5.11 acres fittings using cold heading equipment. Kalamazoo, MI 205,000 sq. ft. Plastic fittings plant. Produces DWV 18 acres fittings using injection molding equipment. Cerritos, CA 115,000 sq. ft. Plastic fittings plant. Produces DWV 5.1 acres fittings using injection molding equipment. Upper 82,000 sq. ft. Plastic fittings plant. Produces DWV Sandusky, OH 7.52 acres fittings using injection molding equipment. -9- ITEM 2. PROPERTIES (continued) Approximate Location Property Size Description Fort Pierce, FL 69,875 sq. ft. Plastic fittings plant. Produces 5.60 acres pressure plastic fittings using injection molding equipment. Bilston, 402,500 sq. ft. Copper tube mill. Facility includes England 14.95 acres casting, extruding, and finishing United Kingdom equipment to produce copper tubing. Port Huron, MI 322,500 sq. ft. Brass rod mill. Facility includes 71.5 acres casting, extruding, and finishing equipment to produce brass rods and bars, in various shapes and sizes. Port Huron, MI 127,500 sq. ft. Forgings plant. Produces brass and aluminum forgings. Marysville, MI 81,500 sq. ft. Aluminum and copper impacts plant. 6.72 acres Produces made-to-order parts using cold impact processes. Hartsville, TN 78,000 sq. ft. Refrigeration products plant. 4.51 acres Produces products used in refrigeration applications such as ball valves, line valves, and compressor valves. Carthage, TN 67,520 sq. ft. Fabrication facility. Produces precision 10.98 acres tubular components and assemblies. Jacksboro, TN 65,066 sq. ft. Bending and fabricating facility. 11.78 acres Produces gas burners, supply tubes, and manifolds for the gas appliance industry. Waynesboro, TN 57,000 sq. ft.(3) Gas valve plant. Facility produces 5.0 acres brass valves and assemblies for the gas appliance industry. North Wales, PA 174,000 sq. ft. Precision Tube factory. Facility 18.9 acres fabricates copper tubing, copper alloy tubing, aluminum tubing, and fabricated tubular products. Brighton, MI 65,000 sq. ft.(4) Machining operation. Facility machines component parts for supply to automotive industry. Middletown, OH 55,000 sq. ft. Fabricating facility. Produces burner 2.0 acres systems and manifolds for the gas appliance industry. -10- In addition, the Company owns and/or leases other properties used as distribution centers and corporate offices. (1) Facility is located on land leased from a local municipality, with an option to purchase at nominal cost. (2) Facility is leased under a long-term lease agreement, with an option to purchase at nominal cost. (3) Facility is leased from a local municipality for a nominal amount. (4) Facility is leased under an operating lease. ITEM 3. LEGAL PROCEEDINGS Environmental Proceedings Reference is made to "Environmental Matters" in Item 1 of this Report, which is incorporated herein by reference, for a description of environmental proceedings. Other Matters The Company is aware of investigations of competition in markets in which it participates, or has participated in the past, in Europe, Canada, and the United States. No charges or allegations have been filed against the Company, which is cooperating with the investigations. The Company does not anticipate any material adverse effect on its business or financial condition as a result of the investigations. ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS None. PART II ITEM 5. MARKET FOR THE REGISTRANT'S COMMON STOCK AND RELATED STOCKHOLDER MATTERS The information required by Item 5 of this Report is included under the caption "Capital Stock Information" in the Registrant's Annual Report to Stockholders for the year ended December 28, 2002, which information is incorporated herein by reference. ITEM 6. SELECTED FINANCIAL DATA Selected financial data are included under the caption "Selected Financial Data" in the Registrant's Annual Report to Stockholders for the year ended December 28, 2002, which selected financial data are incorporated herein by reference. -11- ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS Management's discussion and analysis of financial condition and results of operations is contained under the caption "Financial Review" in the Registrant's Annual Report to Stockholders for the year ended December 28, 2002, which is incorporated herein by reference. ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK Quantitative and qualitative disclosures about market risk are contained in the caption "Financial Review" in the Registrant's Annual Report to Stockholders for the year ended December 28, 2002, which is incorporated herein by reference. ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA See Index to Financial Statements and Financial Statement Schedule of this Annual Report on Form 10-K which is included on page 19. ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE None. PART III ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT The information required by Item 10 is contained under the caption "Ownership of Common Stock by Directors and Executive Officers and Information about Director Nominees" in the Company's Proxy Statement for its 2003 Annual Meeting of Stockholders to be filed with the Securities and Exchange Commission on or about March 24, 2003 which is incorporated herein by reference. ITEM 11. EXECUTIVE COMPENSATION The information required by Item 11 is contained under the caption "Executive Compensation" in the Company's Proxy Statement for its 2003 Annual Meeting of Stockholders to be filed with the Securities and Exchange Commission on or about March 24, 2003 which is incorporated herein by reference. -12- ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS Equity Compensation Plan Information The following table discloses information regarding the securities to be issued and the securities remaining available for issuance under the Registrant's stock-based incentive plans as of December 28, 2002 (shares in thousands):